Panasonic Varicam 35, Руководство по эксплуатации

Страница: 118 / 174

– 118 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[MON OUT] [MON OUT FORMAT] Select the signal output from the <MON OUT1> terminal and <MON OUT2> terminal.
4096 × 2160, 2048 × 1080:
[2048 over
**
p], [1920 (SQUEEZE) over
**
i], [1920 (SIDE CROP) over
**
i], [2048/
**
PsF], [1920
(SQUEEZE)/
**
PsF], [1920 (SIDE CROP)/
**
PsF]
3840 × 2160, 1920 × 1080:
[1920 over
**
p], [1920 over
**
i], [1920/
**
PsF]
**
represents the frequency of the output signal. The signal that can be selected is limited depending
on the [SYSTEM MODE] setting. The setting value will automatically change when the [SYSTEM MODE]
setting is changed.
f
Factory setting: [2048/24PsF]
[3G-SDI OUT] Sets the 3G SDI signal format to be output from the <MON OUT1> terminal and <MON OUT2> terminal.
[LEVEL-A]:
Selects the LEVEL-A method.
[LEVEL-B]:
Selects the LEVEL-B DL method.
f
Factory setting: [LEVEL-B]
[MON OUT2 SIGNAL
SEL]
Sets the output from the <MON OUT2> terminal.
[VF (1080p)]:
Selects the same output as the <VF SDI> terminal. The signal format will always be
1920 × 1080p.
[VF (1080i)]:
Selects the same output as the <VF SDI> terminal. The signal format will always be
1920 × 1080i.
[MON OUT1]:
Selects the same output as the <MON OUT1> terminal.
f
Factory setting: [VF (1080p)]
[MON OUT1 STATUS] Sets whether to show the status display on the output from the <MON OUT1> terminal.
[ON], [OFF]
f
Factory setting: [OFF]
[MON OUT2 STATUS] Sets whether to show the status display on the output from the <MON OUT2> terminal.
[ON], [OFF]
f
Factory setting: [OFF]
[MENU DISP] Sets whether to display [MENU] in the output from the <MON OUT1> terminal and <MON OUT2> terminal.
[ON], [OFF]
f
Factory setting: [ON]
[PLAY DISP & CTRL] Sets whether to display the PLAY screen in the output from the <MON OUT1> terminal and the <MON
OUT2> terminal.
[ON], [OFF]
f
Factory setting: [OFF]
[VF OUT] [VF SDI OUT FORMAT] Selects the signal to output from the <VF SDI> terminal.
[1080P], [1080i]
f
Factory setting: [1080P]
[SURROUND VIEW SW] Enables/disables the surround view function (the function to display the image outside the effective range
on the viewfinder).
[ON], [OFF]
f
Factory setting: [OFF]
[SURROUND VIEW
AREA]
Selects the range of the surround view.
[UPPER (NORMAL)], [LOWER]
The image to be recorded will shift approximately 396 µm upwards from the center of the lens when
[LOWER] is selected. Take care when the zoom lens is used.
f
Factory setting: [UPPER (NORMAL)]
[SURROUND VIEW
LINE SW]
Enables/disables the effective area line mark display function.
[ON], [OFF]
f
Factory setting: [ON]
[SURROUND VIEW
COLOR]
Sets the effective area line mark color.
[WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]
f
Factory setting: [WHITE]
[SURROUND VIEW
LEVEL]
Sets the microphone level for the surround signal.
[OFF], [75%], [50%], [25%]
f
Factory setting: [OFF]
[SMOOTH MODE] Enables/disables the smooth mode (function which smoothens the viewfinder image when 24P and half
shutter function is running).
[ON], [OFF]
f
Factory setting: [OFF]
[MON OUT INDICATOR] [SYSTEM PIXEL] Displays/hides system pixels.
[ON], [OFF]
f
Factory setting: [ON]
[SYSTEM FREQ] Displays/hides system frequency.
[ON], [OFF]
f
Factory setting: [ON]
[REC FORMAT] Displays/hides recording format display.
[ON], [OFF]
f
Factory setting: [ON]
[REC MODE] Displays/hides the status for the interval recording or the pre-recording.
[ON], [OFF]
f
Factory setting: [ON]
[VFR] Displays/hides the variable frame rate status.
[ON], [OFF]
f
Factory setting: [ON]