Panasonic Varicam 35, Руководство по эксплуатации

Страница: 117 / 174

– 117 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[REAR1 VOL] Performs adjustments in this item when the level adjustment method of the rear microphone 1 is set to
[MANUAL].
[0]…[100]
f
Factory setting: [70]
[REAR2 VOL] Performs adjustments in this item when the level adjustment method of the rear microphone 2 is set to
[MANUAL].
[0]…[100]
f
Factory setting: [70]
[FRONT1 LIMITER] Enables/disables the limiter of front microphone 1.
[ON], [OFF]
f
Factory setting: [OFF]
[FRONT2 LIMITER] Enables/disables the limiter of front microphone 2.
[ON], [OFF]
f
Factory setting: [OFF]
[REAR1 LIMITER] Enables/disables the limiter of rear microphone 1.
[ON], [OFF]
f
Factory setting: [OFF]
[REAR2 LIMITER] Enables/disables the limiter of rear microphone 2.
[ON], [OFF]
f
Factory setting: [OFF]
[HEADROOM] Sets the headroom (standard level).
[18dB], [20dB]
f
Factory setting: [20dB]
[AUDIO OUTPUT] [MONITOR SEL1] Sets the audio channel to be output from the <PHONES> terminal.
[CH1/2]:
Outputs audio channel 1/2.
[CH3/4]:
Outputs audio channel 3/4.
f
Factory setting: [CH1/2]
[MONITOR SEL2] Sets the audio format (mono, stereo, mix) to be output from the <PHONES> terminal.
When [MONITOR SEL1] is set to [CH1/2]:
[MONO CH1], [MONO CH2], [STEREO CH1/2], [MIX CH1/2]
When [MONITOR SEL1] is set to [CH3/4]:
[MONO CH3], [MONO CH4], [STEREO CH3/4], [MIX CH3/4]
f
Factory setting: [STEREO CH1/2] or [STEREO CH3/4]
[MONITOR DELAY] Sets whether to delay the audio from the <PHONES> terminal to match the monitor output.
[ON], [OFF]
f
Factory setting: [OFF]
[MONITOR VOL] Adjusts the level of audio to be output from the <PHONES> terminal.
[0]…[100]
f
Factory setting: [70]
[ALARM] Sets the volume of the warning sound to be output from the <PHONES> terminal.
[LOUD], [MEDIUM], [SMALL], [OFF]
f
Factory setting: [MEDIUM]
[OUTPUT SETTINGS]
Sets the display content of the output video from the viewfinder and <VF SDI> terminal.
Item Description of settings
[SDI OUT] [P to PsF] Sets the segment frame for the output from terminals <SDI OUT1> to <SDI OUT4>.
This is enabled only when both of the following items are set.
f
When [MENU] → [SYSTEM SETTINGS] → [SYSTEM MODE] → [FREQUENCY] is set to [29.97p],
[23.98p], or [25.00p].
f
When [MENU] → [SYSTEM SETTINGS] → [SYSTEM MODE] → [PIXEL] is set to [1920 × 1080].
[ON], [OFF]
f
Factory setting: [OFF]
[4K OUT TYPE] Sets the 4K signal format to be output from terminals <SDI OUT1> to <SDI OUT4>.
[SQUARE], [2 SAMPLE INT]
f
Factory setting: [SQUARE]
[3G-SDI OUT] Sets the 3G SDI signal format to be output from terminals <SDI OUT1> to <SDI OUT4>.
[LEVEL-A]:
Selects the LEVEL-A method.
[LEVEL-B]:
Selects the LEVEL-B DL method.
f
Factory setting: [LEVEL-B]
[SDI REC REMOTE] Sets whether to use the control function of recording operation for an external device (such as a recorder)
connected to the <SDI OUT> terminal, the <MON OUT1> terminal, and the <MON OUT2> terminal. It can
be output from the <MON OUT2> terminal only when [MON OUT2 SIGNAL SEL] is set to [MON OUT1].
[ON]:
Controls the recording operation of the external device.
[OFF]:
Does not control the recording operation of the external device.
f
Factory setting: [OFF]