Panasonic Varicam 35, Руководство по эксплуатации

Страница: 114 / 174

– 114 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[TC] [SET TC] Sets the default value of the time code to record.
Hour:
[00] - [23]
Minute:
[00] - [59]
Second:
[00] - [59]
Frame:
[00]…[23]
(for [24p], [23.98p]),
[00]…[23]
(for [50i], [50p], [25p]),
[00]…[29]
(for [59.94i], [59.94p],
[29.97p])
f
Factory setting: [00] (various items)
[SET UB] Sets user bits. Enabled only when [USER] is selected in [UB MODE].
This can be set by each digit from [00] to [FF].
f
Factory setting: [00]
[TC/UB/Dur.] Switches the time code display to the user bits and duration counter display.
[TC], [UB], [Dur.]
f
Factory setting: [TC]
[FREE/REC RUN] Sets the operation mode to advance the built-in time code generator. It will be fixed to [REC RUN] when
[VFR] is set to [ON].
[FREE RUN]:
Advances regardless of the operation mode.
[REC RUN]:
Advances when recording is in process.
f
Factory setting: [FREE RUN]
[DF/NDF] Sets count method for the built-in time code generator of the camera.
[DF]:
Uses the drop frame mode.
[NDF]:
Uses the non-drop frame mode.
f
Factory setting: [NDF]
Enabled only when [59.94i], [59.94p], or [29.97p] is selected in [MENU] → [SYSTEM SETTINGS] →
[SYSTEM MODE] → [FREQUENCY].
[UB MODE] Selects the user bits mode.
[FRAME RATE]:
Selects camera imaging information (such as frame rate).
[USER]:
Selects the user bits value that has been set.
[EXT INPUT]:
Records the user bits values currently input to the <TC IN/OUT> terminal.
[TIME]:
Selects the local time. (hh, mm, ss)
[DATE]:
Selects the local date and time. (YY, MM, DD, hh)
[USER CLIP NAME (TYPE3)]:
CAM INDEX (A-Z) in ASCII character code will go into MSB. Also, the
REEL number in ASCII character code will go into LSB 3 digits.
Example: A123=0x41 0x31 0x32 0x33
0XFFFF is recorded if [USER CLIP NAME] is set to anything other than [TYPE3].
f
Factory setting: [FRAME RATE]
[TC IN/OUT SEL] Sets the input/output of the <TC IN/OUT> terminal.
[TC IN], [TC OUT]
f
Factory setting: [TC IN]
[TC OUT] Selects the time code output to the <TC IN/OUT> terminal.
[TCG], [TCG/TCR]
f
Factory setting: [TCG]
[TC OUT REF] Sets the output delay of the time code output from the <TC IN/OUT> terminal.
[RECORDING], [SDI OUT]
f
Factory setting: [RECORDING]
[REC METADATA] [LOAD] Loads the metadata upload file saved to the SD memory card.
[RECORD] Sets whether to add loaded metadata at a recording.
[ON]:
Adds metadata.
[OFF]: Does not add metadata.
f
Factory setting: [OFF]
[USER CLIP NAME] Sets data to be recorded to [USER CLIP NAME].
It is fixed to [TYPE3] when connected to the V-RAW recorder.
(When [RECORD] is [ON])
[TYPE1]:
Records setting values of the loaded data.
[TYPE2]:
Records the loaded data and counter value.
[TYPE3]:
Records the setting value prescribed with CAM INDEX or REEL number.
(When [RECORD] is [OFF])
[TYPE1]:
Records the same value as [GLOBAL CLIP ID].
[TYPE2]:
Records the same value as [CLIP NAME].
[TYPE3]:
Records the setting value prescribed with CAM INDEX or REEL number.
f
Factory setting: [TYPE3]
[CAM INDEX] Sets CAM INDEX used in [TYPE3] of [USER CLIP NAME].
[A]…[Z]
f
Factory setting: [A]
[NEXT REEL COUNT] Sets REEL used in [TYPE3] of [USER CLIP NAME]. The REEL number for the card that the REEL number
is already assigned would not change.
[001]…[999]
f
Factory setting: [001]
[COUNTER RESET] Resets the counter value when [USER CLIP NAME] is set to [TYPE2].
[PROPERTY] Checks loaded metadata. This cannot be modified.
[REC BEEP SOUND] [MODE] Sets if the beep sound is output at the time when the recording is started or stopped.
[OFF]:
It is not output for both starting and stopping of the recording.
[START]:
It is output at the start of recording.
[STOP]:
It is output at the stop of recording.
[START & STOP]:
It is output for both starting and stopping of the recording.
f
Factory setting: [OFF]