Panasonic Varicam 35, Руководство по эксплуатации

Страница: 122 / 174

– 122 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[SAFETY MARKER] Selects the type of frame for the safety zone marker.
[1]:
Box
[2]: Corners
[OFF]:
Does not display.
f
Factory setting: [OFF]
[SAFETY AREA] Sets the size of the safety zone marker.
[80] - [100%]
(1% step, fixed aspect ratio)
f
Factory setting: [90%]
[FRAME MARK] Enables/disables frame marker.
[ON], [OFF]
f
Factory setting: [OFF]
[FRAME SIG] Sets frame marker aspect ratio.
[1.33:1], [1.44:1], [1.56:1], [1.78:1], [1.85:1], [2.201:1], [2.35:1], [2.39:1]
f
Factory setting: [2.39:1]
[FRAME COLOR] Sets the color of the frame marker.
[WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]
f
Factory setting: [WHITE]
[FRAME LEVEL] Sets the level of the outside of the frame marker.
[0%] - [100%]
(10% step)
f
Factory setting: [100%]
[USER BOX] Sets whether to display/hide the user box display.
[ON], [OFF]
f
Factory setting: [OFF]
[USER BOX WIDTH] Sets the width of the user box.
[1]…[100]
f
Factory setting: [13]
[USER BOX HEIGHT] Sets the height of the user box.
[1]…[100]
f
Factory setting: [13]
[USER BOX H POS] Sets the horizontal position of the center of the user box.
[
−
50]…[50]
f
Factory setting: [0]
[USER BOX V POS] Sets the vertical position of the center of the user box.
[
−
50]…[50]
f
Factory setting: [0]
[MARKER OUT SEL] Selects the output destination of the marker display.
[VF], [VF SDI], [VF & VF SDI]
f
Factory setting: [VF & VF SDI]
[VF FOCUS ASSIST] [EXPAND SW] Displays/hides the enlargement display function.
[ON], [OFF]
f
Factory setting: [OFF]
[- POS] Adjusts the source signal position in an enlarged display.
[0]…[8]
f
Factory setting: [4]
[- VALUE] Adjusts the enlargement factor.
[x2], [x3], [x4]
f
Factory setting: [x2]
[- MODE] Sets the enlargement display function mode.
[10SEC], [HOLD], [UNTIL REC]
f
Factory setting: [10SEC]
[IN COLOR/SQ./MONO
SW]
Displays/hides the advanced assist function (peaking and focus square).
[ON], [OFF]
f
Factory setting: [OFF]
[- FOCUS IN COLOR
SW]
Displays/hides the peaking function.
[ON], [OFF]
f
Factory setting: [OFF]
[-- PEAKING VALUE] Sets the peaking function mode.
[LOW], [MID], [HIGH]
f
Factory setting: [MID]
[-- COLOR SEL] Sets the peaking function color.
[RED], [GREEN], [WHITE]
f
Factory setting: [RED]
[- FOCUS SQUARES
SW]
Displays/hides the focus square function.
[ON], [OFF]
f
Factory setting: [OFF]
[- MONO SW] Enables/disables the monochromatic display function when [IN COLOR/SQ./MONO SW] is set to [ON].
[ON], [OFF]
f
Factory setting: [OFF]
[FOCUS BAR SW] Enables/disables the focus bar display function.
[ON], [OFF]
f
Factory setting: [ON]
[IN COLOR/SQ./MONO
OUT SEL]
Selects the output destination of the advanced assist function.
[VF], [VF SDI], [VF & VF SDI]
f
Factory setting: [VF & VF SDI]