Reco
rding
TQBS0166
19
• Programmes to be recorded with Keyword Recording
(
>
21) are not displayed.
• When the recording mode (picture quality) of a
programme recorded in DR mode is changed,
teletext recorded with the programme will be
lost.
• Only when recording broadcast in other than DR
mode:
– This unit can record programmes in DR mode
and then automatically change their recording
mode (picture quality) to another setting while
in standby. And the original programme in DR
mode will be deleted automatically afterwards.
(
>
15)
• When you programme successive timer
recordings to start, about last 1 minute of earlier
programme will not be recorded.
• Timer recording will not start while copying
(Change Picture Quality), formatting and
finalising etc.
• When “Pure Sound mode” is activated, timer
recording does not start during playback of
BD-Video, DVD-Video or music CD. (
>
54)
• When the recording mode (picture quality) of a
programme recorded in DR mode is changed,
its new audio and subtitle language settings will
be determined by the following settings:
– “Multi Audio” and “Subtitles” in “Preferred
Language” (
>
52, 54)
– “Audio Description” (
>
52, 54)
• If your CAM requires a PIN for timer recording,
you need to enter PIN in advance. (
>
54, PIN
Entry for Decrypt Recording)
Screen icons
Red: Timer recording standby is
activated.
Grey: Timer recording standby is
deactivated.
[
(Red)
Currently recording programme
A part or all of the programme will not
be recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was
not completed because of some
reason.
Auto Renewal Recording is set
(
>
18).
Signal Supported Recording (
>
18)
Displayed if timer recording of two
encrypted programmes is overlapping
(When “Recording for Encrypted
Channel” is set to “Decrypt
Recording” only) (
>
54)
A part or all of the programme will not
be recorded since the encrypted
programme is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is
set.
• The timer remains set until the date
indicated below
.
It may not be possible to record
because:
– there is not enough space left.
– the number of possible programmes
has reached its maximum. (
>
74)
– programmes are deactivated, etc.
Notes on recording
DMRUBC70-UBS70EG-TQBS0166_eng.book 19 ページ ２０２２年１０月３１日 月曜日 午後３時１２分
