Panasonic TY-TP65P10S, Руководство по эксплуатации

Страница: 35 / 48

35
Operation
Touch Panel Setup
Multiple Monitor Setup
Multiple plasma displays can be connected to the same computer, fitted with touch panels and used accordingly.
■
Notes on Connecting Multiple Touch Panels
Monitor No.
The monitor Nos. set in Windows are used when registering the touch panels.
•
Checking Monitor Nos.
 Open the Control Panel from the Start menu.
 Click on “Display”.
 Click on the “Settings” tab.
USB Bandwidth Error
An error message similar to that at right may appear when
connecting multiple touch panels.
It occurs when the total bandwidth secured by USB devices to
send data over USB exceeds the available bandwidth of the USB.
In such case, free up the necessary bandwidth by methods such as connecting the touch panels to
another USB host controller and disconnecting USB devices that are not being used. (p. 42)
Changing Monitor Nos. of Registered Touch Panels
To change monitor Nos. of registered touch panels after disconnecting supported monitors and
reconnecting new ones, either reregister the touch panel or cancel the registration.
 Click this button.
Monitor Nos. appear in each of the monitor icons.
Restrictions on changing monitor resolution and positioning when using multiple monitors
If the monitor resolution or monitor coordinates are changed after calibrating the monitor, the calibrated
coordinates shift out of place.
To change the resolution or positioning, restart the computer.