73
Wireless LAN
A
Place the cursor over the Wireless Switch Utility icon (
or
) on the notification area.
A tooltip appears.
NOTE
z
The Wireless Switch Utility icons (
and
) indicate the on/off status of wireless communication, not the
IEEE802.11a setting.
z
If the IEEE802.11a setting is changed in [Device Manager], the display will be changed accordingly.
To communicate between two computers using the wireless LAN and without using an access point, make the following
settings on each computer.
z
Set the network to be accessed as wireless ad hoc.
z
Set the network names to the same name.
z
Set the network authentication to the same authentication.
z
When using encryption, set the same encryption and the same network key on both computers.
To check the wireless LAN network status
Exchanging Data between Computers Using the Wireless LAN
