Panasonic TH-65SQ1W Скачать руководство пользователя страница 89

Страница: 89 / 149

English

■

[SLOT forced termination]

Forcibly turns off the power of the SLOT. Use this only

when the power cannot be turned off manually due to

the problem of the operating system, etc.

Maximum VOL function

Enables/Disables [Maximum VOL function].

[Off]:

The sound volume level can be set up to 100

(maximum).

[On]:

The volume cannot be set to the level higher than

the level set for [Maximum VOL level].

Maximum VOL level

Sets the sound volume when [Maximum VOL function]

is enabled.

Note

●

Outputs with the set volume when [Maximum VOL

level] in [On] state is selected on the menu.

●

When the [Maximum VOL function] is switched from

[Off] to [On], if the [Maximum VOL level] is set lower

than the [Initial VOL level], the [Initial VOL level]

automatically becomes the same as the [Maximum

VOL level].

Button lock

Limits operation of the buttons on the unit.

[Off]:

All the buttons on main unit can be used.

[On]:

All button operations except for the <Main Power

On / Off button> are disabled.

[MENU & ENTER]:

Locks <MENU (Unit)> and <ENTER (Unit)>

buttons.

■

To set [Button lock]

Set with the buttons on the unit.

[Off]:

   Press  <+ (Unit)> for 4 times.
   Press  <INPUT (Unit)> for 4 times.
   Press  <- (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

[On]:

   Press  <- (Unit)> for 4 times.
   Press  <ENTER (Unit)> for 4 times.
   Press  <+ (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

[MENU & ENTER]:

   Press  <ENTER (Unit)> for 4 times.
   Press  <+ (Unit)> for 4 times.
   Press  <INPUT (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

Note

●

About how to reset the settings to defaults, refer to

“Initialization”. (see page 141)

POWER button lock

Sets the lock setting for the display <Main Power On /

Off button>.

[Off]:

<Main Power On / Off button> operation is

enabled.

[On]:

<Main Power On / Off button> operation is

disabled.

Controller user level

Limits operation of the buttons on the remote control.

[Off]:

You can use all of the buttons on the remote

control.

[User1]:

You can only use <Standby (ON/OFF) button>,

<INPUT>, <RECALL>, <MUTE>, <VOL +> and

<VOL -> buttons on the remote control.

[User2]:

You can only use <Standby (ON/OFF) button> on

the remote control.

[User3]:

Locks all the buttons on the remote control.

Note

●

About how to reset the settings to defaults, refer to

“Initialization”. (see page 141)

DVI-D/SLOT select

Selects a terminal to use.

[

DVI-D

Uses DVI-D IN terminal.

[SLOT]:

Uses SLOT.

Содержание TH-65SQ1W






















































































































































Результаты поиска

Содержание TH-65SQ1W

Отзывы:

Похожие инструкции для TH-65SQ1W

Бренды по названию

Популярные бренды

Panasonic TH-65SQ1W, Руководство по эксплуатации

Результаты поиска

Содержание TH-65SQ1W

Отзывы:

Похожие инструкции для TH-65SQ1W

Бренды по названию

Популярные бренды