103
English
■
Basic control page
The basic operations of the unit can be performed.
Click [Display control
] → [
Basic control].
Power On/Off control
Use these to select the input signals
AUDIO mute
Switches aspect mode
■
Detail control page
The detailed functions of the unit can be performed.
Click [Display control
] → [
Advanced control].
Enter a command. Use the same command used for
the serial control.
Response from the unit is displayed.
Command is sent and run.
Note
●
After the settings are changed, it may take a while till
the display status is displayed.
■
Detailed set up
When connecting by logging in with administer
privileges, you can make detailed settings for network
related to display.
■
LAN settings page
1
Click [Detailed set up] in the menu.
2
Click [Next].
The settings window appears, showing the current
settings.
•
To change the LAN settings, click [Change].
•
To return to the previous window, click [Back].
3
Complete the detailed settings and
click [Next].
In this window, DNS server settings can be made as
well as address information set on the [LAN setup]
menu of the display.
After all required items have been entered, click
[Next]. Then, a confirmation window appears when
[EAP] is set to [NONE].
When [EAP] is set to items other than [NONE], the
next page appears.
Note
●
When [DHCP ON] is set, if the DNS server
address is acquired from the DHCP server, the
acquired address is valid.
●
[EAP] is a function for 65/55/49-inch models. It is
not displayed for 98/86-inch models.
