Panasonic TH-50BF1E, Руководство по эксплуатации, Страница: 90 / 112

88
Options Adjustments
The remote control is used for all the Options menu operations. Unit buttons or multi-touch operations cannot be
used for this operation.
1
Press to display the Setup menu.
Options 1/3
Onscreen display
Weekly command timer
Audio input select
Input search
Initial input Off
Off
Off 0
Off 0
On
Initial VOL level
Maximum VOL level
Input lock
Button lock
Controller user level
Off
Off
Options 2/3
Off-timer function
Initial startup
Last memory
Off
Off
Off
Enable
Serial ID function
0 Display ID
Display size
Studio W/B
Studio gain
LAN control protocol
RS-232C/LAN information timing
Off
Protocol 1
Options 3/3
Slot power
DVI-D power management mode Standard mode
Power on screen delay Off
Off
Manual
Off
All aspect
Off Clock display
Auto setup
On Mobile connection
Power on message(No activity power off)
On
Power on message(Power management) On
2
Press to select “OSD language”.
Press for more than 3 seconds.
3
Press to select “Options”.
Options
Display serial number
Shipping
Press to display the Options menu.
4
Press to select your preferred menu.
Press to adjust the menu.
5
Press to exit from Options menu.
•
The serial number of this device is displayed when “Display serial number” is selected in step 3.
Item Adjustments
Weekly command timer Sets “Weekly command timer”. (see page 91)
Audio input select Set up the sound when an image input is selected. (see page 93)
Input search
Set auto input switching for when there is no signal. (see page 94)
Onscreen display
On: Displays all the following on screen.
Power on display
Input signal switch display
No signal display
Mute and the remaining time of off-timer after was pressed.
Off: Hides all the items above from view.
Note:
• To use the unit without displaying the “Control menu”, set “Control menu” to “Off” or “Flick”. (see page 73)
Initial input
Adjusts the input signal when the unit is turned on.
Off HDMI1 HDMI2 SLOT INPUT
*
1
VIDEO COMPONENT
*
2
PC DVI-D
DIGITAL LINK MIRRORING Panasonic APPLICATION MEMORY VIEWER WHITEBOARD
*
1 “SLOT INPUT” is displayed when an optional Terminal Board is installed.
When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B”
are displayed.
*
2 “COMPONENT” may be displayed as “RGB” depending on the setting of “Component/RGB-in
select”. (see page 84)
Note:
• This menu is available only when “Input lock” is “Off”.
Initial VOL level
Press button to adjust the volume when the unit is turned on.
Off On
Off: Sets normal volume.
On: Sets your preferred volume.
Notes:
• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.