Panasonic TH-50BF1E, Руководство по эксплуатации, Страница: 68 / 112

66
Picture Adjustments
Item Effect Adjustments
Backlight
Darker
Brighter
Adjusts luminance of the back
light.
Contrast
*
Less More
Selects the proper brightness
and density for the room.
Brightness
Darker Brighter
Adjusts for easier viewing of
dark pictures such as night
scenes and black hair.
Colour
Less More
Adjusts colour saturation.
Hue
Reddish Greenish
Adjusts for nice skin colour.
Sharpness
Less More
Adjusts picture sharpness.
*
In “ENGLISH (US)” OSD language, this is displayed as “PICTURE”.
Notes:
•
“Picture mode” is memorized separately
for each input terminal. Also, set the items
from “Backlight” to “White balance” and
“Advanced settings” for each “Picture
mode”.
•
“Backlight” can be adjusted when “ECO
mode” is set to “Custom” and “Power save”
to “Off”. (see page 78)
Advanced settings
Item Effect Details
Input level
Less More
Adjustment of parts which are extremely bright and hard to see.
Gamma
Down Up
S Curve 2.0 2.2 2.6
R gain
Less More
Adjusts the white balance for light red areas.
G gain
Less More
Adjusts the white balance for light green areas.
B gain
Less More
Adjusts the white balance for light blue areas.
R bias
Less More
Adjusts the white balance for dark red areas.
G bias
Less More
Adjusts the white balance for dark green areas.
B bias
Less
More
Adjusts the white balance for dark blue areas.
Notes:
•
Advanced settings cannot be adjusted with two screen display.
•
Carry out white balance adjustment as follows.
1. Adjust the white balance of the bright sections using the “R Gain”, “G Gain” and “B Gain” settings.
2. Adjust the white balance of the dark sections using the “R Bias”, “G Bias” and “B Bias” settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
•
The adjustment values are memorized separately for each input terminal.
•
The adjustment range values should be used as an adjustment reference.
Helpful Hint ( /
Normalise
Normalisation)
On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time
or the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.