Panasonic TH-50BF1E Скачать руководство пользователя страница 78

Страница: 78 / 112

Do not display a still picture, especially in 4:3 mode, for any length of time.

If the display must remain on, a Screensaver should be used.

Select “Screensaver” in “Setup” menu and press

button.

Function selection

Start

Function

Scrolling bar only

Off
Off
Off

Mode
Side panel
Wobbling

Screensaver

Time 10:00

Press to select Function.
Press to select the desired function.

Scrolling bar only

Overlay scrolling bar

Negative image

White screen

Negative image : Negative image will be displayed on the screen.

Scrolling bar only : A white bar will scroll from left to right. The image won't be displayed.

Overlay scrolling bar : The brightness of the image will be decreased and a white bar will

scroll on it.

White screen

: The whole screen will be white.

Note:

Overlay scrolling bar is not effective during two screen display.

Mode selection

Press to select Mode.
Press to select each

mode items.

Standby after SCR saver

: Operates while Screensaver duration, and

display enters standby mode.

: Operates when Start is selected and the

ACTION ( ) button is pressed.

Off

Interval

: Operates when Periodic time and Operating

time are setup and those times arrive.

Time designation : Operates when Start time and Finish time

are setup and those times arrive.

Start setting

When the Mode is set to On, press to select Start.

Press to start Screensaver.

The menu screen will disappear and the Screensaver will be activated.

To stop the

Screensaver under On, press the R button or any buttons on the main unit.

Note:

When the display is turned off, the Screensaver will be deactivated.

Screensaver (For preventing image retention)

Содержание TH-50BF1E

















































































































Результаты поиска

Содержание TH-50BF1E

Отзывы:

Panasonic TH-50BF1E, Руководство по эксплуатации, Страница: 78 / 112

Результаты поиска

Содержание TH-50BF1E

Отзывы: