24
Connections
Input signals and drawn images that can be output
Input signal / Drawn image
Output signal
HDMI input signal (HDMI 1, HDMI 2)
HDCP (copy protection) not supported
1,920 x 1,080@50 Hz or 1,920 x 1,080@60 Hz
DVI-D input signal (DVI-D IN)
HDCP (copy protection) not supported
1,920 x 1,080@50 Hz or 1,920 x 1,080@60 Hz
PC input signal (PC IN)
When “Component/RGB-in select” is set to “RGB”
1,920 x 1,080@50 Hz or 1,920 x 1,080@60 Hz
Whiteboard screen
1,920 x 1,080@60 Hz
Memory Viewer screen (MEMORY VIEWER)
1,920 x 1,080@60 Hz
Notes:
•
Connection cables are not supplied with this unit.
•
The aspect ratio of the output signal is changed so that it can be shown on the screen.
•
The following input signals cannot be output.
Component input (COMPONENT/RGB IN)
Composite video input (VIDEO)
MIRRORING input
Panasonic APPLICATION input
DIGITAL LINK input
Pin Layout and Signal Names of Monitor Out Terminal (Mini-D-sub 15P)
1
6
7
8
3
9
4
5
10
15 14 13 12 11
2
Pin No.
Signal Name
Pin No.
Signal Name
Pin No.
Signal Name
1
R
6
GND (Ground)
11
NC (not connected)
2
G
7
GND (Ground)
12
NC (not connected)
3
B
8
GND (Ground)
13
HD
4
NC (not connected)
9
+5 V DC
14
VD
5
GND (Ground)
10
GND (Ground)
15
NC (not connected)
Computer, DVD player and
other video equipment
USB memory
(To be viewed in Memory
Viewer)
Sub monitor
(Female)
(Male)
Mini D-sub 15p cable
(Commercially available)
PC input terminal
PC OUT connection
The image being reproduced on the display including the image input from video equipment and the contents drawn
on the whiteboard can be displayed on another sub monitor.
To use the function, set “Monitor out” to “On” in “Setup”.
(see page 82)
Note:
Setting it to “On” will adjust the “Picture” menu values to the standard values.