background image

19

1

3

2

Normal

Normalise

Pos. /Size

0
0
0
0

V-Pos

H-Pos

V-Size

H-Size

Normal

Normalise

Pos. /Size

0
0
0
0
0

V-Pos

H-Pos

V-Size

H-Size

Clock Phase

4

Press to display the Pos. /Size menu.

Press to select H-Pos / H-Size / V-Pos / V-Size / 
Clock Phase.

Press to adjust Pos. / Size.

Press to exit from adjust mode.

Notes:

•  Adjustment details are memorized separately for different input signal formats 

(Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 
625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 
(1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are 
memorized for each frequency.) 

•  If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture 

position will shift up or down. This picture position movement cannot be 
controlled by the Picture Pos./Size function.

•  If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, the 

adjustment is not memorized. When exiting the mode, the screen will return 
to a former adjustment.

During “RGB / PC” input signal.

During “AV(S Video)”, “Component” 
and “Digital” input signal.

H-Pos

Adjust the horizontal position.

H-Size

Adjust the horizontal size.

V-Pos

Adjust the vertical position.

V-Size

Adjust the vertical size.

Clock Phase
(RGB/PC in mode)

Eliminate the 

fl

 ickering and distortion.

Adjusting Pos. / Size

While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION 
(  ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

Helpful Hint (   / 

Normalise

  Normalisation)

Содержание TH-37PR10A





















































Отзывы: