Panasonic TH-37PR10A Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 52

background image

6

Safety Precautions

CAUTION

When using the Plasma Display

Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display.

• Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands

or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.

Be sure to disconnect all cables before moving the Plasma Display.

• If the Plasma Display is moved while some of the cables are still connected, the cables may become damaged,

and

fi

re or electric shock could result.

Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any
cleaning.

• Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it becoming dusty.

• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in

fi

re.

Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.

This Plasma Display radiates infrared rays, therefore it may affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or re

fl

ected light from your Plasma Display.

Cleaning and maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning
cloth or a soft, lint-free cloth.

• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in

which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until
the surface is dry.

• Do not scratch or hit the surface of the panel with

fi

ngernails or other hard objects, otherwise the surface may

become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner,
otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been

added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

• Do not allow any detergent to come into direct contact with the surface of the Plasma Display. If water droplets get

inside the unit, operating problems may result.

• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the

cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods
in contact with articles made from rubber or PVC.

«
...
4
5
6
7
8
...
»

Содержание TH-37PR10A





















































Отзывы:

Нет отзывов

Похожие инструкции для TH-37PR10A

Baby-Control BC-400D

Бренд: Hama Страницы: 75

Бренд: ViSAGE Страницы: 54

Бренд: Racegeek Страницы: 23

Бренд: Yaesu Страницы: 8

eiQ-43CVSUWD120FSH

Бренд: ElectrIQ Страницы: 21

ColorEdge CX271

Бренд: Eizo Страницы: 70

Бренд: ViewSonic Страницы: 2

Бренд: XP-PEN Страницы: 12

Бренд: Iiyama Страницы: 36

GUARDIAN PLUS CM-1701

Бренд: Static Solutions Страницы: 2

Бренд: Kidde Страницы: 19

Бренд: NA-DE Страницы: 4

Бренд: laerdal Страницы: 40

Бренд: RF-Link Страницы: 2

Бренд: Raymarine Страницы: 12

MA 275x342 20px

Бренд: AESYS Страницы: 45

Бренд: Harris Страницы: 168

Бренд: Viotek Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды