background image

37

1/3

Options

Off-timer function

INPUT lock
Studio W/B
Advanced PIP
Display size

Initial VOL level
Maximum VOL level

Initial INPUT

Onscreen display

Off
Off
Off
Off

Enable

On
Off

0

Off

Off

0

Options Adjustments

Item

Effect Adjustments

Initial VOL 

level

Off

On

Press 

 button to adjust the volume when the unit is turned on.

Off  

On

Off:

  Sets normal volume.

On:

  Sets your preferred volume.

Notes:

• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.

• You can hear the changed volume regardless of your volume setting before opening the options menu if 

you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.

Maximum VOL 

level

Off

On

Press 

 button to adjust the maximum volume.

Off  

On

Off:

  Sets auto maximum volume.

On:

  Sets your preferred maximum volume.

Notes:

• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” 

automatically becomes the same as the “Maximum VOL level”.

• The volume display can go up to 63 regardless of the settings.

• You can hear the changed volume regardless of your volume setting before opening the options menu if 

you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.

INPUT lock

Off 

 PC 

 INPUT1 

 INPUT2 

 INPUT3

Locks the input switch operation.

Notes:

• Only the adjusted signal is displayed (see page 13).

• Signal can be displayed when the Terminal board is installed.

• Input switch can be used when this is set to “Off”.

• In two screen display mode, if anything other than “Off” is set, the value will be 

fi

 xed as the value 

input in the single screen display mode.

• When a dual input terminal board is attached, A or B is displayed depending on the selected 

input signal. (Ex. INPUT1A, INPUT1B)

Studio W/B

Off

On

Off:

  Nullify all the settings adjusted.

On:

  Sets the colour temperature for TV studio.

Note:

 Valid only when the low is set as colour temperature on screen adjustment.

Advanced PIP

Off

On

Off:

  Sets normal two screen display mode (see page 20).

On:

  Sets Advanced PIP mode (see page 21).

Notes:

• When “INPUT lock” is “On”, you cannot use all the two screen display functions.

• 

 buttons are unavailable during Advanced PIP mode operation.

Display size

Off

On

Adjusts the image display size on screen.

Off:

  Sets the normal image display size on screen.

On:

  Sets the image display size approximately 95 % of the normal image display.

         Off 

             On

 

       

Notes:

• This setting is valid only when the input signals are as follows; 525i, 525p, 625i, 625p, 750/60p, 

750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i (Component 

Video, RGB, DVI, SDI, HDMI)

• This setting is invalid when two screen display, digital zoom or Multi screen is selected.

• When Display size is set to “On”, Pos. /Size adjustment cannot be used. 

• Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.

Содержание TH-37PR10A





















































Отзывы: