27
English
Note
●
Displays the signal name as set in [Input label]. (see
page 44)
●
Input will not be switched unless [Input lock] is set to
[Off]. (see page 54)
●
Image retention (image lag) may occur on the LCD
display panel when a still picture is kept on the panel
for an extended period. To prevent such a problem,
using the screensaver and wobbling is recommended.
(see page 43, 45)
RECALL
It is possible to check the setting status of input label,
picture mode, etc.
Press <RECALL>.
Current setting status will be displayed.
10:00
1
2
3
4
5
PC
16:9
Memory name: MEMORY2
Off timer
90 min
1
Input label
2
Aspect mode (see page 29)
3
Profile name (see page 40)
4
Off timer remaining time (see page 28)
5
Clock / Mute (see page 28, 57)
●
The followings are displayed for about 30 seconds at
the end: [No signal] - when there is no video signal to
the selected input, [No external media] - when a USB
memory is not connected to the USB terminal at the
time of using the USB input.
●
To display the clock, set [Date and time] and then set
[Clock display] to [On]. (see page 48, 57)
Selecting the input signal
Select the signals input to the unit.
Press <INPUT> or <INPUT (Unit)>.
MENU
ENTER
INPUT
+
-
Unit
Switches input every time the buttons are pressed.
PC
16:9
[HDMI1
] → [
HDMI2
] → [
DVI-D
] → [
PC
] → [
VIDEO
] →
[USB]
[HDMI1]:
HDMI 1 terminal, HDMI input
[HDMI2]:
HDMI 2 terminal, HDMI input
[DVI-D]:
DVI-D IN terminal, DVI-D input
[PC]:
PC IN terminal, PC input
[VIDEO]:
VIDEO terminal, composite video input
[USB]:
USB terminal, USB input
