Panasonic th-32ef1u Скачать руководство пользователя страница 54

Страница: 54 / 90

English

Note

●

With the USB input, the unit determines no signal

is present when the USB memory is not connected

to the USB terminal.

●

This menu will be greyed out and cannot be set

under the following conditions.

•

[Input lock] is not set to [Off]. (see page 54)

●

If the input is changed by this function, the last

input is selected when the power is turned on next

time.
If you wish to retain the original input when the

power is turned on, set [Initial input] to the original

input. (see page 54)

Onscreen display

Set to display / hide the following Onscreen display.

●

Power on display

●

Input signal switch display

●

No signal display

●

No external media display (at USB input)

●

MUTE display after displaying the menu screen

●

MUTE and off timer remaining time display after

<RECALL> is pressed

●

Off timer remaining time display when 3 minutes

remaining

[On]:

Displays the Onscreen display.

[Off]:

Hides the Onscreen display.

Initial input

Adjusts the input signal when the unit is turned on.

[Off] / [HDMI1] / [HDMI2] / [DVI-D] / [PC] / [VIDEO]

/ [USB]
Note

This menu is available only when [Input lock] is [Off].

(see page 54)

Initial VOL level

Adjusts the sound volume level when the unit is turned

on.

[Off]:

It will be the sound volume level which had been

set before the power of the unit was turned off.

[On]:

Sets your preferred volume.

●

Outputs with the set volume when [Initial VOL level] in

[On] state is selected on the menu.

■

To adjust sound volume level

Press <VOL +> <VOL ->.

Note

●

When [Maximum VOL level] is [On], the volume

cannot be set to the level higher than the level set for

[Maximum VOL level].

Maximum VOL level

Adjusts the maximum volume.

[Off]:

The sound volume level can be set up to 100

(maximum).

[On]:

The sound volume level will not exceed the set

point.

●

Outputs with the set volume when [Maximum VOL

level] in [On] state is selected on the menu.

■

To adjust sound volume level

Press <VOL +> <VOL ->.

Note

●

When the [Maximum VOL level] is switched from

[Off] to [On], if the [Maximum VOL level] is set lower

than the [Initial VOL level], the [Initial VOL level]

automatically becomes the same as the [Maximum

VOL level].

Input lock

Locks the input switch operation.

[Off] / [HDMI1] / [HDMI2] / [DVI-D] / [PC] / [VIDEO]

/ [USB]

Note

●

Input switch can be used when this is set to [Off].

Button lock

Limits operation of the buttons on the unit.

[Off]:

All the buttons on main unit can be used.

[On]:

All button operations except for the <Main Power

On / Off button> are disabled.

[MENU & ENTER]:

Locks <MENU (Unit)> and <ENTER (Unit)>

buttons.

Содержание th-32ef1u



























































































Результаты поиска

Содержание th-32ef1u

Отзывы:

Похожие инструкции для th-32ef1u

Бренды по названию

Популярные бренды

Panasonic th-32ef1u, Инструкция по эксплуатации (Функциональное руководство)

Результаты поиска

Содержание th-32ef1u

Отзывы:

Похожие инструкции для th-32ef1u

Бренды по названию

Популярные бренды