Panasonic System 850, Руководство по эксплуатации

Страница: 90 / 119

94
■
Video Loss History Table
There are 100 video loss detection records stored in
chronological order in 10 pages of table.
1. Select a monitor for displaying the history.
Refer to the Monitor Selection.
2. Pressing the [5] key while holding down the [MONI-
TOR] key will display the VIDEO LOSS HISTORY table
as shown in the figure on the active monitor.
The columns in the table indicate the states as shown
below.
LCAM: Logical camera number that is connected to
the system.
STATE: Indicates video loss changes.
OK: Video loss is recovered.
LS: Video level is below normal and in sync.
VL: Video level is below normal and out of sync.
HL: Video level is above normal and out of sync.
TYPE: Place where the video loss occurs.
S: MXSW input
C: MXCONT input
DATE-TIME: Date and time when the video loss state
changes.
3. Press the [NEXT] key to select the next page of the his-
tory, and press the [PREV] key to back up to the previ-
ous page.
4. Press the
[NEXT]
key while holding down the
[SHIFT]
key to select the first page of the history, and press the
[PREV] key while holding down the [SHIFT] key to
select the last page.
5. Pressing the [0] key while holding down the [MONI-
TOR] key will toggle the background camera images
and black on the active monitor.
6. To exit as it stands, select a new monitor.
7. To exit from the mode, press the [CLEAR (ESC)] key
while holding down the [MONITOR] key or select a
camera to be displayed on the active monitor.
VIDEO LOSS HISTORY PG 1
LCAM STATE TYPE DATE-TIME
2 OK S 03/21/00 10:17
2 LS S 03/21/00 10:16
2 OK S 03/21/00 10:15
1 OK C 03/21/00 10:14
3 OK C 03/21/00 10:14
5 VL C 03/21/00 10:12
1 VL C 03/21/00 10:12
3 VL C 03/21/00 10:11
5 VL S 03/21/00 10:10
1 OK C 03/21/00 9:50
CAM ID
VLD S
T&D
ALM S
GEN
SYS S
(ALARM)
0
8 7
MSTATUS
VLD H
ALL
ALM H
BLK
5
9
6 4
2 3 1
SHIFT
CLEAR
(ESC)
EXIT
GROUP
PRESET
PREV
S-CTL ID OPE ID
NEXT
GROUP
SEQ
PAUSE STOP
TOUR
SEQ
R E V
RU N F W D
RU N
OSD
VER
MONITOR
LOCK
OSD SERVICE