74
VQT2A17
75
VQT2A17
With a
computer
1
Software on the CD-ROM
The supplied CD-ROM contains the software below:
This CD-ROM can only be used on Windows computers.
Image management/DVD production software VideoCam Suite 2.0
This software allows motion pictures and still pictures to be acquired from this
unit, edited and output.
The acquired motion pictures and still pictures can also be attached to e-mail
or edited and saved on DVD.
For information about how to use VideoCam Suite, read the PDF operating
instructions.
We cannot guarantee proper operation of this unit if you use software other
than that supplied.
●
With a
computer
2
End User License
Agreement
Before opening the CD-ROM package, please read the following.
End User License Agreement
You (“Licensee”) are granted a license for the Software defined in this End User License
Agreement (“Agreement”) on condition that you agree to the terms and conditions of this
Agreement. If Licensee does not agree to the terms and conditions of this Agreement,
promptly return the Software to Panasonic Corporation (“Panasonic”), its distributors or
dealers from which you made the purchase.
Article 1 License
Licensee is granted the right to use the Software, including the information recorded
or described on the CD-ROM, instruction manuals, and any other media provided
to Licensee (collectively “Software”), but all applicable rights to patents, copyrights,
trademarks and trade secrets in the Software are not transferred to Licensee.
Article 2 Use by a Third Party
Licensee may not use, copy, modify, transfer or allow any third party, whether free of
charge or not, to use, copy or modify the Software, except as expressly provided for in this
Agreement.
Article 3 Restrictions on Copying the Software
Licensee may make a single copy of the Software in whole or in part solely for back-up
purpose.
Article 4 Computer
Licensee may use the Software only on one computer, and may not use it on more than
one computer.
Article 5 Reverse Engineering, Decompiling or Disassembly
Licensee may not reverse engineer, decompile, or disassemble the Software, except
to the extent either of them is permitted under law or regulation of the country where
Licensee resides.
Panasonic, or its distributors will not be responsible for any defects in the Software
or damage to Licensee caused by Licensee’s reverse engineering, decompiling, or
disassembly of the Software.
Article 6 Indemnification
The Software is provided “AS-IS” without warranty of any kind, either expressed or
implied, including, but not limited to, warranties of non-infringement, merchantability and/or
fitness for a particular purpose. Further, Panasonic does not warrant that the operation
of the Software will be uninterrupted or error free. Panasonic or any of its distributors
will not be liable for any damage suffered by Licensee arising from or in connection with
Licensee’s use of the Software.
Article 7 Export Control
Licensee agrees not to export or re-export to any country the Software in any form without
the appropriate export licenses under regulations of the country where Licensee resides,
if necessary.
Article 8 Termination of License
The right granted to Licensee hereunder will be automatically terminated if Licensee
contravenes any of the terms and conditions of this Agreement. Upon termination hereof,
Licensee must destroy the Software and related documentation together with all the
copies thereof at Licensee’s own expense.
