background image

16

VQT2A17

17

VQT2A17

Using the hand strap (supplied)

 Using as strap

  Fit over your wrist and adjust the 

length of the strap.

 Using as a grip belt

  Screw the adaptor hanging from 

the strap into the tripod hole.

  Fit over your hand and adjust the 

length of the strap.

 Attaching the float

The float prevents the unit from sinking 
when it is accidentally dropped into water.

Cleaning the float after use (P.19)

Attach the float here.

Using the LCD monitor

Images can be checked on the LCD monitor when recording.

 Open the LCD monitor.

 Adjust the angle.

Hold [ ] to 

open.

Up to 90 ˚

Up to 90 ˚

Opening the LCD monitor beyond the mechanical limit or turning it more than 
90 ˚ may allow water to enter and damage the mechanism.
Brightness and color density can be adjusted. (P.31)

Parts identification and handling

 (cont.)

“Before using the unit under water”

(IMPORTANT) Waterproof performance

Waterproof performance

The waterproofing and dustproofing of this unit comply with IP58 of IEC 60529 “Degrees 
of protection provided by enclosures (IP Code)”. The unit passed waterproofing tests 
(IEC 60529), in which it was submerged to a depth of 2.0 m (6.5 feet) for 30 minutes, 
and dustproof tests (IP Code: IP58) in accordance with Panasonic standards, but this 
does not guarantee that the unit will not be damaged or malfunction by contact with 
water and dust. (The supplied AC adaptor and battery are not waterproof.)

This unit can be used underwater, but care should be taken as improper 
handling may cause water to enter the unit and result in malfunction and 
loss of SD card data. Read the following carefully before using the unit.

The penetration of water into the unit due to mishandling by the user is not covered by 
the guarantee given for the unit’s waterproof performance. If water should penetrate 
the unit, stop using the unit, and consult the dealer from whom you purchased the unit.

 Handling

Do not leave the unit in locations where the 
temperature exceeds 40 °C (104 °F) (such as 
places exposed to strong sunlight, car interiors 
on hot days or locations near heating equipment, 
in particular) for extended periods of time. (Doing 
so could degrade its waterproof performance.)
The waterproof performance of the unit cannot 
be guaranteed if it is exposed to impacts, such 
as being bumped or dropped. If the unit is 
deformed by an impact, refrain from using it underwater and contact Service 
Center to have its waterproof performance checked (charges apply).
Do not plug the unit in or unplug it with wet hands.
The unit’s waterproof performance is effective only in fresh and saltwater.

 Opening and closing the card/battery door and terminal cover

To open:  Lift the flap upright and turn it counter-clockwise until it clicks for 

unlocking and then open the door/cover.

 To close:  Close the door/cover and turn the flap clockwise to the locking 

position and then push the flap back flat.

Locking 
position

Do not open and close the card/battery door and terminal cover with wet 
hands or when in or near water.
When droplets of water have formed on this unit or on the inside of its doors 
or cover, be absolutely sure to wipe them off using a lint-free cloth before 
opening or closing the parts concerned.


NG

NG

Over 40 °C 

(104 °F)

Содержание SDR-SW21

























































































































Отзывы: