8
RQ
T
X
11
98
[\\\\\\\\\AUX\\\\\\\\]
This connection enables you to play audio from your TV,
STB or VCR through your home theater system (
B
10,
Selecting the source by the remote control).
Connect the audio cable (not supplied) from the
AUX terminal on this unit to the AUDIO OUT terminal
on your TV.
≥
Connect to the terminals of the same colour.
[Note]
If you have various sound sources (such as Blu-ray
player, DVD recorder, VCR, etc.), connect them to the
available inputs on the TV and the TV output should
then be connected to the SCART (AV), AUX or HDMI AV
OUT terminal of this unit.
Conserving power
This unit consumes a small amount of power, even
when it is in standby mode (approx. 0.9 W). To save
power when the unit is not to be used for a long time,
unplug it from the household mains socket.
You will need to reset some memory items after
plugging in this unit.
[Note]
The supplied AC mains lead is for use with this unit only.
Do not use it with other equipment. Also, do not use
cords for other equipment with this unit.
≥
Use alkaline or manganese batteries.
≥
Do not heat or expose to flame.
≥
Do not leave the battery(ies) in an automobile exposed
to direct sunlight for a long period of time with doors
and windows closed.
Do not:
≥
mix old and new batteries.
≥
use different types of batteries at the same time.
≥
take apart or short circuit.
≥
attempt to recharge alkaline or manganese batteries.
≥
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can severely damage the remote control.
Remove the batteries if the remote control is not going
to be used for a long period of time. Store in a cool, dark
place.
Aim at the remote control signal sensor (
B
5), avoiding
obstacles.
Distance: Within approx. 7 m
Angle: Within approx. 20° up and down, approx. 30° to
the left and right
The EASY SETUP screen assists you in making
necessary settings.
Other audio connection
step 3
AC mains lead connection
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
step 4
Preparing the remote control
Batteries
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
AC IN
To household mains
socket
This unit
(rear)
AC mains lead
(supplied)
R6/LR6, AA
Press in and lift up.
Replace the cover.
Insert so the poles (
r
and
j
) match those in the
remote control.
Use
step 5
EASY SETUP
Preparation
Turn on your TV and select the appropriate video input
mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the
connection to this unit.
≥
To change your TV’s video input mode, refer to its
operating instructions.
≥
This remote control can perform some basic TV
operations (
B
5).
1
Press [
Í
] to turn on the unit.
≥
When the EASY SETUP screen appears
automatically, skip steps 2 to 6.
2
Press [DVD] to select “DVD/CD”.
3
Press [SETUP] to show the setup menu.
4
Press [
3
,
4
] to select “OTHERS” and press
[OK].
5
Press [
3
,
4
] to select “EASY SETUP” and
press [OK].
6
Press [OK] to select “SET”.
7
Press [
3
,
4
] to select “Yes” and press [OK].
8
Follow the messages and make the settings
with [
3
,
4
,
2
,
1
] and [OK].
(
B
9, EASY SETUP settings)
9
Press [OK] to finish EASY SETUP.
SET
MAIN
DISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
EXIT : SETUP
RETURN
Menu
SC-PT90EB-RQTX1198-B_eng.book Page 8 Wednesday, May 5, 2010 11:58 AM
