10
RQ
T
X
11
98
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
You can select sound effects, desired source, or access
playback/menus by using the START menu.
When “Input Selection” is selected
You can select a desired source from the menu.
≥
DVD/CD (
B
12), FM RADIO (
B
9), AV
§
(
B
below),
AUX
§
(
B
below), ARC
§
(
B
below), MUSIC PORT
(
B
below)
§
“(TV)” will appear beside “AV”, “AUX” or “ARC”,
indicating the TV audio setting for VIERA Link
“HDAVI Control” (
B
16).
When “Sound” is selected
You can select sound quality settings (
B
11, EQ
(Equaliser)).
When a disc is loaded, you can also access playback or
menus from the START menu.
e.g.
[DVD-V]
When the on-screen control panel appears
e.g.
[DVD-V]
(when “Playback Disc” is selected from the
START menu)
You can operate the playback with the indicated controls.
[Note]
Confirm the audio connection to the SCART (AV),
AUX or HDMI AV OUT terminal on this unit when you
select the corresponding sources (
B
7, 8). Reduce the
volume on the TV to its minimum, and then adjust the
volume of this unit.
Preparation
≥
Make sure that there is an audio connection between
this unit and the TV or other device. (
B
7, 8)
≥
Turn on the TV or/and other device.
Press [EXT-IN] to choose the source that is used to
connect this unit to the TV or other device.
≥
To change the surround sound effects and sound mode,
refer to “Enjoying sound effects from all speakers”
(
B
11)
≥
If your Panasonic TV is VIERA Link compatible, refer to
“Using the VIERA Link “HDAVI Control
TM
”” (
B
16) for
other related functions.
Select to suit the type of audio from the HDMI AV OUT
terminal on this unit.
Setting must be made for the “ARC” selector.
≥
Boxed items are the factory presets.
Using the START menu
1
Press [START] to show the START menu.
≥
When using VIERA Link “HDAVI Control”, the TV
also turns on when the START menu is displayed.
e.g.
2
Press [
3
,
4
] to select an item and press [OK].
≥
To exit, press [START].
3
Press [
3
,
4
] to make the setting and press [OK].
Selecting the source by the remote control
Press
To select
[DVD]
DVD/CD
[RADIO] FM
(
B
9
)
[EXT-IN]
Each time you press the button:
AV:
AUX:
ARC:
MUSIC P.:
For audio input through the SCART
(AV) terminal.
For audio input through the AUX
terminal.
For audio input through the HDMI
AV OUT terminal.
For audio input through MUSIC
PORT. (
B
17)
DVD/CD
Home Cinema
Input Selection
Sound
DVD/CD
Home Cinema
Input Selection
Sound
P l a y b a c k D i s c
TOP MENU (DVD)
MENU (DVD)
Playback/menu access
Listening to the TV or other device’s
audio from this unit’s speakers
Making settings for digital audio input
Available settings
Mode
Setting
MAIN/SAP:
(Only works with Dolby Dual Mono)
–
[MAIN+SAP]
(stereo audio)
–MAIN
–SAP
“
SAP
” = Secondary Audio Program
≥
Set PCM FIX mode to “PCM OFF” to
listen to the “MAIN” or “SAP” audio.
DRC:
(Dynamic
Range
Compression)
–
DRC ON
Adjust for clarity even when the volume
is low by compressing the range of the
lowest sound level and the highest
sound level. Convenient for late night
viewing. (Only works with Dolby Digital)
–
[DRC\OFF]
The full dynamic range of the signal is
reproduced.
PCM FIX:
–
PCM ON
Select when receiving only PCM
signals.
–
[PCM\OFF]
Select when receiving Dolby Digital
and PCM signals.
≥
When receiving true 5.1-channel
surround sound, select “PCM OFF”.
1
Press [EXT-IN] several times to select “ARC”.
2
Press [PLAY MODE] several times to select the
mode.
3
While the selected mode is displayed
Press [
3
,
4
] and select the desired setting.
SC-PT90EB-RQTX1198-B_eng.book Page 10 Wednesday, May 5, 2010 11:58 AM
