background image

Panasonic Corporation

Web Site:

http://panasonic.net

C

 Panasonic Corporation 2009

RQTX1018-2B

F0809AA1109

p

Safety precautions

Set the unit up on an even surface away from direct sunlight, high 

temperatures, high humidity, and excessive vibration. These conditions 

can damage the cabinet and other components, thereby shortening the 

unit’s service life.

Do not place heavy items on the unit.

Do not use high voltage power sources. This can overload the unit and 

cause a fire.

Do not use a DC power source. Check the source carefully when setting 

the unit up on a ship or other places where DC is used.

Ensure the AC mains lead is connected correctly and not damaged. Poor 

connection and lead damage can cause fire or electric shock. Do not pull, 

bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC mains 

lead can cause electric shock.

Do not handle the plug with wet hands. This can cause electric shock.

Do not let metal objects fall inside the unit. This can cause electric shock 

or malfunction.

Do not let liquids get into the unit. This can cause electric shock or 

malfunction. If this occurs, immediately disconnect the unit from the 

power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain flammable 

gases which can ignite if sprayed into the unit.

Do not attempt to repair this unit by yourself. If sound is interrupted, 

indicators fail to light, smoke appears, or any other problem that is not 

covered in these instructions occurs, disconnect the AC mains lead and 

contact your dealer or an authorized service center. Electric shock or 

damage to the unit can occur if the unit is repaired, disassembled or 

reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power source if it 

is not to be used for a long time.

Caution for AC Mains Lead

(For Saudi Arabia and Kuwait)

(“GS” area code model only)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your 
safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement 
fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to 
BS1362.
Check for the ASTA mark 

Ï

 or the BSI mark 

Ì

 on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is 
refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement 
cover is obtained.
A replacement fuse cover can be purchased from your local dealer.

If a new plug is to be fitted please observe the wiring code as stated 
below.
If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following 
code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings 
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal which 
is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal 
which is marked with the letter L or coloured Brown or Red.

WARNING: DO NOT CONNECT EITHER WIRE TO THE 
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER 
E, BY THE EARTH SYMBOL 

Ó

 OR COLOURED GREEN OR 

GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug 
(figures A and B). Confirm the AC mains plug fitted and follow the 
instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

Placement

Voltage

AC mains lead protection

Foreign matter

Service

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE 
SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE 
REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE 
CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.

Figure A

Figure B

Fuse cover

Figure A

Figure B

Fuse
(5 ampere)

Fuse
(5 ampere)

SC-PT75-70G-RQTX1018-2B_eng.book  Page 22  Wednesday, September 30, 2009  5:44 PM

Содержание SC-PT75























Отзывы: