RQT9478
7
Installing and assembling the rack
Connection
Installation
Installing and assembling the rack
At least 2 people are necessary for
installation.
Use a phillips-head screwdriver. (Do not use
an electric screwdriver.)
Choose a stable location for installation.
Handle the glass shelf with enough carefully.
Wire dressing cover assembly
(
➜
page 9)
Glass shelf assembly
(
➜
page 8)
Setting the caster trays (
➜
page 9)
Setup example
Removing casters
From front and back of the rack, 2 people lift
the top board at the center of the rack.
• Make sure to place the rack on a
fl
at, stable surface so there is no
danger of it falling over. Take enough safety measures to prevent the
television from falling down. Make sure to set the caster trays when the
casters are attached.
• You can install this system so that it is
fl
ush with the wall at the back.
Note that you will require some space for working during setup and
connection.
• Do not place in front of curtains as they may obstruct the system’s
exhaust hole.
• Avoid pressing on the speaker nets during installation.
• If the surface of the wooden
fl
oor is soft, the caster mark may remain.
• See below for removing casters.
• Remove casters at unstable places. (thick-piled carpet,
fl
oor made of soft materials, etc.)
• To remove the casters, reversely place the Styrofoam (marked with
✽
on page 3, packing plan) used at the upper center when
shipped, and then tip the rack back so that the top board can be put on the Styrofoam. At least 2 people are necessary for this.
If you do not have the Styrofoam, spread soft cloth such as a blanket and tip the rack to the front side slowly.
• Do not apply the load to the wire dressing part when tipping the rack back. (Remove the wire dressing cover (
➜
page 9) when it is
attached.)
• Hold and pull to remove.
• Do not put anything on and in the rack when removing casters. (You do not need to remove the ampli
fi
er and speakers as they are
fi
xed.)
• Make sure that at least 2 people hold the back side of the top board
fi
rmly with hands when moving the rack after removing the
casters. (Do not hold the wire dressing part.) See the following instructions about how to lift the rack.
About the rack
Do not put anything except for a TV. Do not put the following things in particular.
• Hot objects
This may leave the mark and it may not come off.
• Vase, etc. with water in it
Water may splash over this system when it falls down and this can cause malfunction.
How to lift the rack
This system
(Bottom plate)
Hold and pull.
Caster
Front side
Back side
Soft cloth, etc.
Styrofoam
Wire dressing part
Place so that the top
board of the rack can
be put.
Make sure that your
hands do not touch the
wire dressing part.
Note
When moving a thing placed on the top board, lift it for moving. Dragging it may damage the top board of the rack.
