RQT9478
27
Troubleshooting guide
Troubleshooting and
other information
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents issued & pending. DTS
and DTS Digital Surround are registered trademarks and
the DTS logos and Symbol are trademarks of DTS, Inc. ©
1996-2008 DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks
of Dolby Laboratories.
HDMI, the HDMI logo and High-De
fi
nition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
HDAVI Control™ is a trademark of Panasonic Corporation.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical
and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC
and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and
prevent any potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Cd
Problem
Possible solution
Pages
VIERA Link “HDAVI
Control” does not
function properly.
• Con
fi
rm “VIERA Link “HDAVI Control” setting” is set to “
ON
” (when the
operation is linked). When it is “
OFF
”, change to “
ON
”.
• VIERA Link “HDAVI Control” does not function in standby condition when this
system is turned off. See “Reducing standby power consumption (HDMI off
mode)” and set to “
ON
” (normal power consumption).
• Check VIERA Link “HDAVI Control” settings of the connected equipment.
• VIERA Link “HDAVI Control” may not function when you change the connections for HDMI equipment,
insert and remove the outlet, or during blackout. Do the following operations in this case.
–
Turn on the TV (VIERA) again while all the equipment connected with HDMI cables is on.
–
Set “VIERA Link “HDAVI Control” (HDMI equipment control)” of TV (VIERA) to “OFF” and
then set to “ON” again. (For details, refer to the operating instructions for TV (VIERA).)
–
Connect this system to TV (VIERA) using the HDMI cable, switch the TV (VIERA) on,
unplug this system’s AC mains lead, and insert it into a household mains socket again.
22
21
—
—
Could watch TV (VIERA) when
installed, but now cannot watch TV.
• When using this system in combination with TV (VIERA) only, check if HDMI cable is not
connected to “BD/DVD IN” of this system. If it is connected to “BD/DVD IN”, connect to “TV OUT”.
—
Even if multi-channel audio
sources, such as DVD, Blu-ray disc,
are played back, “ DIGITAL”
or “DTS” is not displayed.
• When using VIERA Link “HDAVI Control” and the speaker is set to “TV”, press
VIERA Link button on the remote control of TV (VIERA) and set the speaker to
“Home Cinema”.
18
This system’s input automatically
switches to “
AUX2 / STB
”, but sound
is not heard. Or unexpected sound
from other equipment is heard.
• After “Setting for automatically switching the input source to STB”, the
connection might have been changed. Select “
OFF
” once and “
SET
” again.
11
HDMI
