Panasonic SC-HTX5, Руководство по эксплуатации

Страница: 5 / 28

RQT9478
5
AC IN
SPEAKERS
SUBWOOFER
TV
TV OUT
OPTICAL 1 OPTICAL 2 COAXIAL
TV AUX 2 AUX 3
BD/DVD IN AUX 1
AUX 4
AUDIO IN
3 Ω 4 Ω
FRONT
R
R
L
L
DIGITAL IN
This system (Rack)
Before use
Control guide
Speaker terminals
The speakers are already connected.
Do not touch the connectors unless
absolutely necessary.
If the connectors become disconnected,
refer to the illustrations at right for
connection.
Connector connection How to attach the connectors
The connectors and terminals
are colour-coded and can only be
inserted in one direction. Insert each
connector into the terminal of the
same colour until it clicks in position.
SPEAKERS
SUBWOOFER
3 Ω 4 Ω
FRONT
R
L
L R
Speaker terminals AC inlet ( ➜ page 13) Digital input terminals ( ➜ pages 10 to 12, 19)
Audio input terminals
( ➜ pages 10, 12, 13)
HDMI terminals ( ➜ pages 10, 11, 13, 19)
Exhaust hole (Cooling fan)
Purple
Purple
White
Red
White
Red
Terminal block
Connector
(Ampli fi er)
Digital transmitter terminal
Wire dressing cover
Subwoofer
Front speaker (left)
Subwoofer
Front speaker (right)
Glass shelf
Caster/Caster trays
Front view
Rear view
(Display)
PCM
W
DIGITAL DTS
PL
SFC
VS
DIGITAL INPUT
Digital surround signal/Sound fi eld ( ➜ below, page 17)
When input signal is digital
When PCM signal is being input or the input
signal setting is
fi xed to PCM ( ➜ page 23)
General display
When the input signal setting is fi xed
to DTS ( ➜ page 23)
When the digital transmitter is operating ( ➜ page 14)
VOLUME
WHISPER-MODE
SURROUND
INPUT
SELECTOR
Standby/on switch ( 8 )
( ➜ page 16)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Display ( ➜ below)
For adjusting volume
( ➜ page 16)
“INPUT SELECTOR”
switch
( ➜ page 16)
For using “WHISPER-MODE SURROUND” ( ➜ page 20)
(Control panel)
DIGITAL : Dolby Digital sources
DTS :
DTS sources
VS : When Dolby Virtual Speaker is working
SFC : When SFC mode is being used
PL : When Dolby Pro Logic decoder is being
used (When using Dolby Virtual Speaker
for 2 channel stereo source)
Control guide