RQT9478
20
Functions and settings
Using “WHISPER-MODE SURROUND”
This function is effective during surround playback only. You can enjoy the dynamic effect
even if the sound volume level is low during surround playback.
Press [WHISPER-MODE SURROUND].
“
W.S. ON
” is displayed.
To cancel
Press again.
If cancelled, “
W.S. OFF
” is displayed.
To return to the previous
display/To cancel during setting
operation (
➜
page 21):
Press [ RETURN].
Play
Functions and settings
WHISPER-MODE SURROUND is not effective in the following cases.
When not using the wireless surround speakers:
When Dolby Virtual Speaker is off
When using the wireless surround speakers:
When Dolby Pro Logic and SFC are off with 2-channel signal input
If the above setting is made when this function is on, [WHISPER-MODE SURROUND]
indicator disappears and this function temporarily becomes off.
Using “GAME”
Enjoy gaming with more dynamic sound.
Press [GAME].
• “
GAME
” mode (
➜
page 17) in SFC is selected.
To cancel
Press again.
If cancelled, SFC’s effect itself is cancelled.
Muting
“
MUTE
” blinks on the display while the volume is muted.
Press [MUTE].
To cancel
Press again.
• Muting is cancelled when you switch the system to standby.
• Muting is also cancelled when you adjust the volume.
Adjusting speaker (subwoofer, wireless surround
speaker) output during playback
Depending on the playback signal, you may feel the volume of the subwoofer or surround
speakers (when used
➜
page 14) is not balanced with the volume of the front speakers. In
this case, you can adjust the speaker volume during playback.
1. Press [CH] to select a speaker for adjustment.
(The speaker is switched each time you press the button.)
When not using the wireless surround speakers:
SUBW
(Subwoofer)
When using the wireless surround speakers (
➜
page 14):
SUBW
(Subwoofer)
p
RS
(Wireless surround right)
p
LS
(Wireless surround left)
2. Press [SPEAKER LEVEL +, –] to adjust each speaker’s output level.
Adjustment range:
SUBW: OFF
,
MIN
,
1
to
19
,
MAX
RS
,
LS:
–
10
to
+10
Repeat steps 1 and 2 to adjust the level of each speaker.
• You cannot adjust the front speakers with this operation. To adjust the volume balance of left
and right front speakers, see “Adjusting the volume balance of front speakers”. (
➜
page 21)
• There is no output from the subwoofer if you select “
OFF
”.
• If the sound is distorted, lower the level.
• You cannot adjust the output level of speakers if the sound
fi
eld effect is off and the
speakers’ audio output is set to off. (
➜
page 17)
• You can adjust the speaker’s output level in SFC’s each mode respectively. (
➜
page 17)
VOLUME
WHISPER-MODE
SURROUND
INPUT
SELECTOR
• When this function is on, [WHISPER-
MODE SURROUND] indicator lights
up on the control panel.
This setting can be made on the control panel as well.
Press
Control panel
[WHISPER-MODE SURROUND] indicator
Note
Note
Note
