43
Specifications / Maintenance
RQ
TX00
89
[Subwoofer\SB-HW460]
Type
1 way, 1 speaker system (Bass reflex)
Speaker unit(s)
Impedance 6
≠
Woofer
16 cm Cone type
Input power (IEC)
250 W (Max)
Output sound pressure
81 dB/W (1.0 m)
Frequency range
31 Hz to 220 Hz (
j
16 dB)
37 Hz to 180 Hz (
j
10 dB)
Dimensions (W
t
H
t
D)
153 mm
k
415 mm
k
257 mm
Mass
3.6 k
g
Power supply
AC 230 to 240 V, 50 Hz
Power consumption
This unit
135 W
Dimensions (W
t
H
t
D)
[PT460]
430 mm
k
63 mm
k
327 mm
[PT467]
430 mm
k
68 mm
k
327 mm
Mass
This unit
3.4 k
g
Operating temperature range
0
o
C to
r
40
o
C
Operating humidity range
35
%
to 80
%
RH
(no condensation)
[AMPLIFIER\SECTION]
RMS output power
Surround Ch
125 W per channel (3
≠
), 1 kHz, 10 % THD
Total RMS power
250 W
DIN output power
Surround Ch
70 W per channel (3
≠
), 1 kHz, 1 % THD
Total DIN power
140 W
[RF\SECTION]
Wireless module
Frequency range
2.400 GHz to 2.4835 GHz
No. of channels
3
[GENERAL]
Power supply
AC 230 to 240 V, 50 Hz
Power consumption
Digital transmitter
1.5 W
Wireless system
43 W
Dimensions (W
t
H
t
D)
Digital transmitter
65 mm
k
52 mm
k
8.6 mm
Wireless system
165 mm
k
90 mm
k
164 mm
Mass
Digital transmitter
0.02 k
g
Wireless system
0.655 k
g
§
6
Rating with low-cut filter equipped amplifier
[Note]
1 Specifications are subject to change without notice.
Mass and dimensions are approximate.
2 Total harmonic distortion is measured by a digital
spectrum analyzer.
∫
To clean discs
Wipe with a damp cloth and then wipe dry.
∫
Disc handling precautions
≥
Do not attach labels or stickers to discs. This may
cause disc warping, rendering it unusable.
≥
Do not write on the label side with a ball-point pen
or other writing instrument.
≥
Do not use record cleaning sprays, benzine,
thinner, liquids which prevent static electricity, or
any other solvent.
≥
Do not use scratch-proof protectors or covers.
≥
Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
∫
Clean this unit with a soft, dry cloth.
≥
Never use alcohol, paint thinner or benzine to clean this
unit.
≥
Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Do not use commercially available lens cleaners as
they may cause malfunction.
Cleaning of the lens is
generally not necessary although this depends on the
operating environment.
GENERAL
Power consumption in standby mode
approx. 0.4 W
[PT467]
WIRELESS SYSTEM AND DIGITAL TRANSMITTER
Power consumption in off mode
approx. 0.3 W
Before moving the unit, ensure the disc tray is
empty.
Failure to do so will risk severely damaging the
disc and the unit.
DO
DO NOT
Maintenance
Body5.fm Page 43 Thursday, January 3, 2008 6:39 PM
