7
RQ
TX00
89
Notes on speaker use
≥
Use only supplied speakers
Using other speakers can damage the unit, and sound
quality will be negatively affected.
≥
You can damage your speakers and shorten their
useful life if you play sound at high levels over
extended periods.
≥
Reduce the volume in the following cases to avoid
damage:
–When playing distorted sound.
–When the speakers are reverberating due to a record
player, noise from FM broadcasts, or continuous
signals from an oscillator, test disc, or electronic
instrument.
–When adjusting the sound quality.
–When turning the unit on or off.
If irregular colouring occurs on your TV
The center speaker is designed to be used close to a
TV, but the picture may be affected with some TVs and
setup combinations.
If this occurs, turn the TV off for about 30 minutes.
The demagnetising function of the TV should correct the
problem. If it persists, move the speakers further away
from the TV.
Caution
≥
Do not touch the front netted area of the speakers.
Hold by the sides.
e.g. Center speaker
∫
Attaching to a wall
You can attach all of the speakers (except
subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to be
attached should be capable of supporting 10 k
g
per screw. Consult a qualified building contractor
when attaching the speakers to a wall. Improper
attachment may result in damage to the wall and
speakers.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s)
with the hole(s).
∫
Fitting speaker stands
(not included)
(Except subwoofer)
Ensure the stands meet these conditions before
purchasing them.
Note the diameter and length of the screws and the
distance between screws as shown in the diagram.
≥
The stands must be able to support over 10 k
g
.
≥
The stands must be stable even if the speakers
are in a high position.
e.g.
Center speaker
Caution
≥
This unit and the supplied speakers are to be
used only as indicated in this setup. Failure to do
so may lead to damage to the amplifier and/or
the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has
occurred or if you experience a sudden change
in performance.
≥
Do not attempt to attach these speakers to walls
using methods other than those described in this
manual.
DO
DO
NOT
Speaker installation options
‰
7.0 to 9.4 mm
4 to 6 mm
Wall or pillar
‰
4.0 mm
At least 30 mm
Front and surround
speaker
Center speaker
190 mm
Speaker
stand
(not included)
Plate thickness plus
7 mm to 10 mm
5 mm, pitch 0.8 mm
Metal screw
holes
For attaching to
speaker stands
60 mm
Q
U
ICK ST
AR
T GUIDE
Q
U
IC
K
S
TA
R
T
G
U
ID
E
Q
U
ICK ST
AR
T GUIDE
step 1
SC-PT460-467EB-RQTX0089-2B.book Page 7 Wednesday, December 26, 2007 3:15 PM
