39
T
rou
b
le
s
ho
oti
n
g gu
id
e
RQ
TX00
89
(Continued on next page)
General operation
No response when any
buttons are pressed.
≥
This unit cannot play discs other than the ones listed in these operating
instructions.
≥
The unit may not be operating properly due to lightning, static electricity or
some other external factor. Turn the unit off and then back on. Alternatively,
turn the unit off, disconnect the AC mains lead, and then reconnect it.
≥
Condensation has formed. Wait 1 to 2 hours for it to evaporate.
36
—
—
No response when remote
control buttons are
pressed.
≥
Check that the batteries are installed correctly.
≥
The batteries are depleted. Replace them with new ones.
≥
Aim the remote control at the remote control signal sensor and operate.
11
11
15
Other products respond to
the remote control.
≥
Change the remote control operating mode.
14
No picture or sound.
≥
Check the video or speaker connection.
≥
Check the power or input setting of the connected equipment and this unit.
≥
Check that the disc has something recorded on it.
9, 10
—
—
You have forgotten your
ratings password.
Reset all the settings to
Factory Preset.
≥
While stopped and “DVD/CD” is the source, press and hold [
∫
] (Stop) on this
unit and [
S
10] on the remote control until “INITIALIZED” disappears from the
TV. Turn the unit off and on again.
All settings will return to the default values.
(This does not work during program and random modes, or when setup
menu or START menu is displayed.)
—
The VIERA Link “HDAVI
Control” function does not
respond.
≥
Depending on the condition of this unit or the connected equipment, it may
be necessary to repeat the same operation so that the function can work
correctly.
28
The setting you made in “TV
ASPECT” (
➜
24, “VIDEO”
menu) or “LANGUAGE”
(
➜
25, “DISPLAY” menu)
does not work.
≥
The settings for “TV ASPECT”
§
1
and “LANGUAGE”
§
2
will automatically follow
to the settings of the TV. Select using TV settings.
§
1
When using VIERA Link “HDAVI Control” with “HDAVI Control 3”
compatible TV
§
2
When using VIERA Link “HDAVI Control” with “HDAVI Control 2 (or later)”
compatible TV
—
Disc operation
It takes time before play
starts.
≥
Play may take time to begin when an MP3 track has still picture data. Even
after the track starts, the correct play time will not be displayed. This is
normal.
[MP3]
—
A menu screen appears
during skip or search.
[VCD]
≥
This is normal for Video CDs.
—
Playback control menu
does not appear.
[VCD]
with
playback control
≥
Press [
∫
STOP] twice and then press [
1
PLAY].
—
Program and Random play
do not work.
[DVD-V]
≥
These functions do not work with some DVD-Videos.
—
Play does not start.
≥
This unit may not play WMA that contains still picture data.
≥
If a disc contains CD-DA and other formats, proper playback may not be
possible.
—
—
No subtitles.
≥
Display the subtitles. (“SUBTITLE” in Menu 1)
21
Point B is automatically
set.
≥
The end of an item becomes point B when it is reached.
—
The Setup menu cannot be
accessed.
≥
Select “DVD/CD” as the source.
≥
Cancel Program and Random play.
—
18
SC-PT460-467EB-RQTX0089-2B.book Page 39 Wednesday, December 26, 2007 3:15 PM
