Panasonic PT-RW430UK, Руководство по эксплуатации

Страница: 60 / 138

Chapter 4 Settings — [ADVANCED MENU] menu
60 - ENGLISH
3) When [ON] is selected, press the <ENTER> button.
f
The [EDGE BLENDING] screen is displayed.
4) Press
as
to specify the location to be corrected.
f
When joining at top: Set [UPPER] to [ON]
f
When joining at bottom: Set [LOWER] to [ON]
f
When joining at left: Set [LEFT] to [ON]
f
When joining at right: Set [RIGHT] to [ON]
5) Press
qw
to switch [ON] and [OFF].
6) Press
as
to select [START] and [WIDTH].
7) Press
qw
to adjust the starting position and correction width.
f
By setting [AUTO TESTPATTERN] on the [EDGE BLENDING] screen to [ON], the white test pattern is displayed when you enter the
setting screen of starting point and correction width.
8) Press
as
to select [MARKER].
9) Press
qw
to switch [ON].
f
A marker for image position adjustment is displayed. The position where the red and green lines overlap for the projectors to be joined
will be the optimal point. Make sure to set the correction width for the projectors to be joined with the same value. Optimal joining is not
possible with projectors that have different correction widths.
The optimal point is the point at which these lines overlap.
Green line
Red line
10) Press
as
to select [BRIGHTNESS ADJUST].
11) Press the <ENTER> button.
f
The [BRIGHTNESS ADJUST] screen is displayed.
f
By setting [AUTO TESTPATTERN] on the [EDGE BLENDING] screen to [ON], the black test pattern is displayed when you enter the
[BRIGHTNESS ADJUST] screen.
12) Press
as
to select [NON-OVERLAPPED BLACK LEVEL].
13) Press the <ENTER> button.
f
The [NON-OVERLAPPED BLACK LEVEL] screen is displayed.
f
If [INTERLOCKED] is set to [OFF], [RED], [GREEN], and [BLUE] can be adjusted individually.
14) Press
as
to select an item, and press
qw
to adjust the setting.
f
Once the adjustment is completed, press the <MENU> button to return to the [BRIGHTNESS ADJUST] screen.
15) Press
as
to select [UPPER], [LOWER], [LEFT], and [RIGHT] in [BLACK BORDER WIDTH].
16) Press
qw
to set the region (width) of the [BLACK BORDER WIDTH] adjustment.
17) Press
as
to select [BLACK BORDER LEVEL].
18) Press the <ENTER> button.
f
The [BLACK BORDER LEVEL] screen is displayed.
f
If [INTERLOCKED] is set to [OFF], [RED], [GREEN], and [BLUE] can be adjusted individually.