Panasonic PT-RW430UK, Руководство по эксплуатации

Страница: 67 / 138

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 67
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select the item from
the sub-menu.
Refer to “Navigating through the menu” (
x
page 44) for the operation of the menu screen.
f
After selecting the item, press
asqw
to set.
[COLOR MATCHING]
Correct the color difference between projectors when using multiple projectors simultaneously.
Adjusting the color matching as desired
1) Press
as
to select [COLOR MATCHING].
2) Press
qw
to switch [COLOR MATCHING].
f
The items will switch each time you press the button.
[OFF] Color matching adjustment is not carried out.
[3COLORS] Adjusts the three colors [RED], [GREEN], or [BLUE].
[7COLORS] Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].
[MEASURED] Refer to “Adjusting the color matching using a colorimeter” (
x
page 68) for details about this mode.
3) Select [3COLORS] or [7COLORS], and press the <ENTER> button.
f
The [3COLORS] or [7COLORS] screen is displayed.
4) Press
as
to select [RED], [GREEN], [BLUE], or [WHITE] ([RED], [GREEN], [BLUE], [CYAN],
[MAGENTA], [YELLOW], or [WHITE] for [7COLORS]).
5) Press the <ENTER> button.
f
The [3COLORS:RED] , [3COLORS:GREEN] , [3COLORS:BLUE] , or [3COLORS:WHITE] screen is displayed.
For [7COLORS], the [7COLORS:RED] , [7COLORS:GREEN] , [7COLORS:BLUE] , [7COLORS:CYAN] , [7COLORS:MAGENTA] ,
[7COLORS:YELLOW] , or [7COLORS:WHITE] screen is displayed.
6) Press
as
to select [RED], [GREEN], or [BLUE].
f
If [WHITE] is selected from [3COLORS], only [GAIN] can be adjusted.
7) Press
qw
to adjust.
f
The adjustment value changes between 0 and 2 048
*1
.
*1 Depends on the signal input.
Note
f
Operation when correcting the adjustment color
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
f
This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is
required to make a successful adjustment.
f
Pressing the <DEFAULT> button will restore the factory default settings for all items.
f
If [COLOR MATCHING] is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER]. (However, [WHITE BALANCE HIGH]
cannot be adjusted.)
f
When “[PICTURE MODE]” (
x
page 49) is set to [DYNAMIC], [COLOR MATCHING] cannot be adjusted.