Chapter 4
Settings — [NETWORK] menu
112 - ENGLISH
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(ERROR) ===
Projector Type
: RW430
Serial No
: SW1234567
----- check system -----
MAIN CPU BUS
[ OK ]
FAN
[ OK ]
INTAKE AIR TEMPERATURE
[ OK ]
OPTICS MODULE TEMPERATURE
[ OK ]
INTERNAL AIR TEMPERATURE
[ OK ]
LIGHT STATUS
[ OK ]
INTAKE AIR TEMP.SENSOR
[ OK ]
OPTICS MODULE TEMP.SENSOR
[ FAILED ]
INTERNAL AIR TEMP.SENSOR
[ OK ]
BATTERY
[ OK ]
PHOSPHOR WHEEL
[ OK ]
(Error code 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00)
Intake air temperature
:[ 18 degC / 64 degF ]
Optics module temperature
:[ 30 degC / 86 degF ]
Internal air temperature
:[ 28 degC / 82 degF ]
PROJECTOR RUNTIME
9 H
-------- Current status --------
MAIN VERSION
1.00
NETWORK VERSION
1.00
SUB VERSION
1.00
POWER STATUS
POWER=STANDBY
INPUT SIGNAL
DVI-I
SIGNAL NAME
XGA60
SIGNAL FREQUENCY
48.36kHz / 60.00H
----- Wired Network configuration -----
DHCP Client
OFF
IP address
192.168.0.8
MAC address
04:20:9A:00:00:00
Mon Jul 05 14:11:29 2012
----- Memo -----
[ECO management set up] page
You can perform settings for the ECO management function of the projector.
Click [Detailed set up]
→
[ECO management set up].
1
2
3
4
5
6
7
1 [LIGHT POWER]
Select the light source power setting.
2 [AUTO POWER SAVE]
Select [ON] to set [AMBIENT LIGHT DETECTION], [SIGNAL
DETECTION], and [AV MUTE DETECTION].
3 [AMBIENT LIGHT DETECTION]
Enables ([ON])/disables ([OFF]) the ambient light detection
function.
4 [SIGNAL DETECTION]
Enables ([ON])/disables ([OFF]) the signal detection function.
5 [AV MUTE DETECTION]
Enables ([ON])/disables ([OFF]) the AV mute detection function.
6 [NO SIGNAL SHUT-OFF]
Select the time until the projector enters the standby mode
when the signal detection function is used.
7 [Submit]
Update the settings.
Note
f
For detailed description of each setting item, refer to the [PROJECTOR SETUP] menu of the projector
→
[ECO MANAGEMENT]
(
x
page 77).
Содержание PT-RW430UK
Страница 33: ...ENGLISH 33 Chapter 3 Basic Operations This chapter describes basic operations to start with ...
Страница 118: ...118 ENGLISH Chapter 5 Maintenance This chapter describes inspection when there are problems and maintenance methods ...
Страница 123: ...ENGLISH 123 Chapter 6 Appendix This chapter describes specifications and after sales service for the projector ...