Panasonic PT-MZ16K, Руководство по эксплуатации

Страница: 113 / 221

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 131
f
When the combination of the input for [BACKUP INPUT MODE] is the SDI input and DVI-D input or the SDI input and HDMI input, the input
is switched seamlessly if the input is switched between the primary input and the secondary input while it is possible to switch to the backup
input signal.
f
When [AUTOMATIC SWITCHING] is set to [ENABLE], and [BACKUP INPUT STATUS] shows [ACTIVE], the signal is switched to the
backup input if a disruption occurs in the input signal.
f
When [AUTOMATIC SWITCHING] is set to [ENABLE], the indication in [BACKUP INPUT STATUS] will change to [INACTIVE] if the input
signal is disrupted and automatically switches to the backup input. In this case, it is not possible to switch to the backup input signal until the
original input signal is restored. If the input has switched to the backup input automatically, it is possible to switch to the backup input signal
when the original signal has been restored. In this case, the current input is maintained.
f
The primary input setting values are applied to image adjustment values such as the [PICTURE] menu → [PICTURE MODE], [GAMMA],
and [COLOR TEMPERATURE].
f
When the combination of inputs in [BACKUP INPUT MODE] is the SDI input and DVI-D input or the SDI input and HDMI input, the backup
function is enabled only in the following combination of signals.
Primary input
[SDI]
Secondary input
[DVI-D]/[HDMI]
HD-SDI 720/60p YP
B
P
R
4:2:2 720/60p YP
B
P
R
4:4:4
HD-SDI 720/50p YP
B
P
R
4:2:2 720/50p YP
B
P
R
4:4:4
3G-SDI 1080/60i RGB 1080/60i RGB
3G-SDI 1080/50i RGB 1080/50i RGB
3G-SDI 1080/24p RGB 1080/24p RGB
3G-SDI 1080/25p RGB 1080/25p RGB
3G-SDI 1080/30p RGB 1080/30p RGB
3G-SDI 1080/60p YP
B
P
R
4:2:2 1080/60p YP
B
P
R
4:4:4
3G-SDI 1080/50p YP
B
P
R
4:2:2 1080/50p YP
B
P
R
4:4:4
[SECONDARY INPUT]
Set the secondary input switching function that will automatically switch to the specified input when the input
signal of projecting image is discontinued.
1) Press
as
to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f
The [NO SIGNAL SETTING] screen is displayed.
3) Press
as
to select [SECONDARY INPUT].
4) Press the <ENTER> button.
f
The
[SECONDARY INPUT]
screen is displayed.
5) Press
as
to select the input to be specified as the switching destination, and press the <ENTER>
button.
[OFF] Disables the secondary input switching function.
[HDMI] Sets the secondary input to HDMI.
[DVI-D] Sets the secondary input to DVI-D.
[SDI]
Sets the secondary input to SDI.
[RGB] Sets the secondary input to RGB.
[DIGITAL LINK] Sets the secondary input to DIGITAL LINK.
[BACK COLOR]
Set the display of the screen when a signal is not input.
1) Press
as
to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f
The [NO SIGNAL SETTING] screen is displayed.
3) Press
as
to select [BACK COLOR].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[BLUE] Displays blue in the entire screen.