Panasonic PT-FW530, Руководство по эксплуатации

Страница: 83 / 156

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 83
[AUTO SETUP SETTING]
Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP>
button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press
as
to select [AUTO SETUP SETTING].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Enables the auto setup function when switching signals.
[BUTTON] Enables the auto setup function only when the <AUTO SETUP> button is pressed.
[SIGNAL SEARCH]
When the power is turned on, this function automatically detects the terminal which signals are input and sets the
function to switch.
1) Press
as
to select [SIGNAL SEARCH].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON] Enables input detection automatically.
[OFF] Disables input detection automatically.
Note
f
If the [SIGNAL SEARCH] is set to [ON] when there is no signal input, press the <AUTO SETUP> button, this function automatically detects
the terminal to which signals are input and then switches.
[STARTUP INPUT SELECT]
Set the input when the projector is switched on to start projection.
1) Press
as
to select [STARTUP INPUT SELECT].
2) Press the <ENTER> button.
f
The
[STARTUP INPUT SELECT]
screen is displayed.
3) Press
as
to select an item.
f
The items will switch each time you press the button.
[LAST USED] Keeps the input selected last.
[NETWORK] Sets the input to NETWORK.
[COMPUTER1] Sets the input to COMPUTER1.
[COMPUTER2] Sets the input to COMPUTER2.
[HDMI1] Sets the input to HDMI1.
[HDMI2] Sets the input to HDMI2.
[VIDEO] Sets the input to VIDEO.
[DIGITAL LINK] Sets the input to DIGITAL LINK.
[INPUT1] -
[INPUT10]
*1
Sets the input to DIGITAL LINK, and switches the input of Panasonic twisted-pair-cable transmitter to the
specified input.
*1 When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its input name is
automatically reflected from [INPUT1] to [INPUT10]. If an item where the input name is not reflected is selected, it is disabled.
Note
f
When [SIGNAL SEARCH] is set to [ON], the [STARTUP INPUT SELECT] cannot be set.
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
1) Press
as
to select [BACK COLOR].
2) Press
qw
to switch the item.