Panasonic PT-FW530, Руководство по эксплуатации

Страница: 48 / 156

Chapter 3 Basic Operations — Projecting
48 - ENGLISH
Switching the input by displaying the input guide
The input for projection can be selected by displaying the input guide with the control panel.
1) Press the <INPUT SELECT> button on the control panel.
f
The [DETAILED] input guide or the [SIMPLE] input guide is displayed. (
x
page 76)
2) Press the <INPUT SELECT> button again.
f
The input will switch each time you press the <INPUT SELECT> button.
f
You can also select the input source by pressing
asqw
on the remote control or the control panel from
the [DETAILED] input guide.
Note
f
The input guide for [DETAILED]/[SIMPLE], you can change the setting from the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] →
[INPUT GUIDE].
Adjusting the image
Adjust the position, size and focus of the projected image.
1) Adjust the projection angle.
f
Install the projector on a horizontal location as the front surface of the projector is parallel to the screen
surface so that the projected screen is rectangular.
f
If the screen is tilted downward, extend the adjustable feet and adjust the projection screen so that the
projected screen is rectangular.
f
Refer to "Adjusting adjustable feet" (
x
page 35) for details.
2) Release the lens shift lever lock by turning it counter-clockwise.
3) Adjust the lens shift. (Fig. 1)
f
Adjust the projection position by using the lens shift lever.
f
Refer to "Adjustment range by the lens position shift (optical axis shift)" (
x
page 49) for details.
4) Lock the lens shift lever by turning it clockwise.
5) Adjust the zoom and focus. (Fig. 2)
f
Adjust the projected image size by turning the zoom lever.
f
Adjust the focus by turning the focus lever.
Note
f
It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.
The input guide for [DETAILED]
The input guide for [SIMPLE]
If there is no signal input ([COMPUTER1],
[COMPUTER2], [HDMI1] or [HDMI2]), this
screen will be displayed. Check the output
settings of your computer.
Lens shift lever
Fig. 1
Zoom lever
Focus lever
Fig. 2