Panasonic PT-FW530, Руководство по эксплуатации

Страница: 77 / 156

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 77
1) Press
as
to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f
The [ON-SCREEN DISPLAY] screen is displayed.
3) Press
as
to select [WARNING MESSAGE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] Hides the warning message.
[ON] Displays the warning message.
Note
f
When [WARNING MESSAGE] is set to [OFF], the warning message will not be displayed on the projected image even if a warning status
such as lamp replacement, temperature warning or air filter replacement is detected.
[COMPUTER IN/OUT]
Set to match the signal to input to the <COMPUTER 1 IN> terminal and the <COMPUTER 2 IN/1 OUT> terminal.
Setting [COMPUTER1 INPUT SETTING]
Switches the input for the <COMPUTER 1 IN> terminal.
1) Press
as
to select [COMPUTER IN/OUT].
2) Press the <ENTER> button.
f
The [COMPUTER IN/OUT] screen is displayed.
3) Press
as
to select [COMPUTER1 INPUT SETTING].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[RGB/YP
B
P
R
]
Select when you want to input the RGB signal or YP
B
P
R
(YC
B
C
R
) signal to the <COMPUTER 1 IN>
terminal.
[Y/C]
Select when you want to input a luminance signal and a color signal to the <COMPUTER 1 IN>
terminal by using the optional D-SUB - S Video conversion cable (Model No.:ET-ADSV).
Note
f
When Y/C signals are input to the <COMPUTER 1 IN> terminal, please use the optional D-SUB - S Video conversion cable (Model No.:ET-
ADSV). Refer to “Connecting example: AV equipment” (
x
page 37) for connecting method.
[COMPUTER2 SELECT]
Set whether to use the <COMPUTER 2 IN/1 OUT> terminal.
1) Press
as
to select [COMPUTER IN/OUT].
2) Press the <ENTER> button.
f
The [COMPUTER IN/OUT] screen is displayed.
3) Press
as
to select [COMPUTER2 SELECT].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[COMPUTER2 IN]
Select when you want to input the RGB signal or YP
B
P
R
(YC
B
C
R
) signal to <COMPUTER 2 IN/1 OUT>
terminal.
[COMPUTER1 OUT]
Select when you want to output the RGB signal or the YP
B
P
R
/(YC
B
C
R
) signal to <COMPUTER 1 IN>
terminal.
Note
f
If [COMPUTER2] is selected to be input, [COMPUTER2 SELECT] cannot be selected.