Panasonic PT-DW740 Скачать руководство пользователя

Страница: 42 / 133

42 - ENGLISH

Chapter 3 Basic Operation — Switching on/off the projector

Power indicator

Displays the status of the power. Check the <ON (G)/STANDBY (R)> status of the power indicator before operating the projector.

Power indicator <ON

（

）

/STANDBY

（

）

Indicator status

Status

No illumination or flashing

The main power is switched off.

Red

Lit

The power is switched off. (Standby mode.)

Projection will start if the power on <

> button is pressed.

The projector may not operate when the lamp indicators <LAMP1>/<LAMP2> or

temperature indicator <TEMP> is flashing. (

page 110)

Green

Lit

Projecting.

Orange

Lit

The projector is preparing to switch off the power.

The power is switched off after a while. (Changes to the standby mode.)

Note

When the power indicator <ON (G)/STANDBY (R)> lamp is lit in orange, the fan is turning and the projector is cooling.

The projector consumes power even in standby mode (power indicator <ON (G)/STANDBY (R)> is lit in red).
Refer to “Power consumption” (

page 128) for the power consumption.

The power indicator <ON (G)/STANDBY (R)> will flash in green if a remote control signal is received.

The power indicator <ON (G)/STANDBY (R)> will flash slowly in green while the shutter is closed. (

page 47)

If the power indicator <ON (G)/STANDBY (R)> is flashing in red, consult your dealer.

Switching on the projector

To use a projection lens that is an optional accessory, attach the lens before switching on the projector. (

page 35)

Remove the lens cover first.

Connect the power plug to an outlet.

(AC 220 V - 240 V 50 Hz/60 Hz)

Press the <ON> side of the <MAIN POWER>

switch to turn on the power.

The power indicator <ON (G)/STANDBY (R)> will light in red,

and the projector will enter the standby mode.

Press the power on <

> button.

The power indicator <ON (G)/STANDBY (R)> will light in green

and the image will soon be projected on the screen.

Note

If the projector is switched on at about 0°C (32°F), a warm-up period of approximately five minutes may be necessary until a projection is

displayed.

The temperature indicator <TEMP> is lit during the warm-up period. When the warm-up is completed, the temperature indicator <TEMP>

turns off and the projection starts. Refer to “Managing the indicated problems” (

page 110) for the indicator status.

If the operating environment temperature is low and warm-up takes more than 5 minutes, the projector will judge that a problem has

occurred and the power will automatically be set to stand-by. If this happens, increase the operating environment temperature to 0°C (32°F)

Содержание PT-DW740






































































































































Результаты поиска

Содержание PT-DW740

Отзывы:

Похожие инструкции для PT-DW740

Бренды по названию

Популярные бренды

Panasonic PT-DW740, Руководство по эксплуатации

Результаты поиска

Содержание PT-DW740

Отзывы:

Похожие инструкции для PT-DW740

Бренды по названию

Популярные бренды