Panasonic PT-DW740, Руководство по эксплуатации

Страница: 61 / 133

ENGLISH - 61
Chapter 4 Settings — [POSITION] menu
r r
[ASPECT]
[DEFAULT] Pictures are displayed without changing the aspect ratio of the input signals.
[VID AUTO]
The projector identifies the video ID (VID) embedded in the image signals and displays the image by
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for VIDEO/S-VIDEO
(NTSC) signals.
[S1 AUTO]
The projector identifies the S1 signal, and displays the image by automatically switching the screen sizes
between 4:3 and 16:9. This function is effective for
S-VIDEO (NTSC)
signals.
[VID AUTO(PRI.)]
The projector identifies the video ID (VID) embedded in image signals and S1 signals, and displays the
image by automatically switching the screen sizes between 4:3 and 16:9 in accordance with VID if it detects
VID, or S1 signal if it does not detect VID. This function is effective for S-VIDEO (NTSC) signals.
[AUTO]
The projector identifies the video ID (VID) embedded in the image signals and displays the image by
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for 480i/480p
signals.
[THROUGH] Pictures are displayed without changing the resolution of the input signals.
[16:9]
When standard signals
*1
are input, the pictures are displayed with the aspect ratio converted to 16:9. When
wide-screen signals
*2
are input, the pictures are displayed without changing the aspect ratio.
[4:3]
When standard signals *1 are input, the pictures are displayed without changing the aspect ratio. When
wide-screen signals *2 are input, if [4:3] is selected with [SCREEN FORMAT], the pictures are displayed with
the aspect ratio converted to 4:3. When [SCREEN FORMAT] is other than [4:3], the picture size is reduced
without changing the aspect ratio so that the pictures will fit in the 4:3 screen.
[H FIT]
The pictures are displayed using the entire width of the screen range selected with [SCREEN FORMAT].
When signals have the aspect ratio vertically longer than the aspect ratio of the screen selected with
[SCREEN FORMAT], the pictures are displayed with the top and bottom parts cut off.
[V FIT]
The pictures are displayed using the entire height of the screen range selected with [SCREEN FORMAT].
When signals have the aspect ratio horizontally longer than the aspect ratio of the screen selected with
[SCREEN FORMAT], the pictures are displayed with the right and left parts cut off.
[HV FIT]
The pictures are displayed in the entire screen range selected with [SCREEN FORMAT]. When the aspect
ratio of the input signals differs from that of the screen range, the pictures are displayed with the aspect
ratio converted to that of the screen selected with [SCREEN FORMAT].
*1 Standard signals are input signals with an aspect ratio of 4:3 or 5:4.
*2 Wide-screen signals are input signals with an aspect ratio of 16:10, 16:9, 15:9 or 15:10.
Note
r f
Some size modes are not available for certain types of input signals. [DEFAULT] cannot be selected for NTSC signals.
r f
If an aspect ratio which is different from the aspect ratio for the input signals is selected, the pictures will appear differently from the originals.
Be careful of this when selecting the aspect ratio.
r f
If using this projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note that
adjusting the aspect ratio or using the zoom function to change the screen pictures may be an infringement of the rights of the original
copyright owner for that program under copyright protection laws. Take care when using a function of the projector such as the aspect ratio
adjustment and zoom function.
r f
If conventional (normal) 4:3 pictures which are not wide-screen pictures are displayed on a wide screen, the edges of the pictures may not
be visible or they may become distorted. Such pictures should be viewed with an aspect ratio of 4:3 in the original format intended by the
creator of the pictures.
[ZOOM]
You can adjust the size of the projected image.
When [ASPECT] is set to other than [DEFAULT] or [THROUGH]
1)
Press
as
to select [ZOOM].
2)
Press the <ENTER> button.
r f
The [ZOOM] screen is displayed.
3)
Press
as
to select [INTERLOCKED].
4)
Press
qw
to switch [INTERLOCKED].
5)
Press
as
to select [VERTICAL] or
[HORIZONTAL].
r f
Select [BOTH] when [ON] is selected.
6)
Press
qw
to adjust.
r r
[INTERLOCKED]
[OFF]
[VERTICAL]
Set the [VERTICAL] and [HORIZONTAL] zoom ratio.
[HORIZONTAL]
[ON] [BOTH]
Use [BOTH] to set zoom ratio. Horizontal and vertical can be expanded
by units of 1.0 time.