Panasonic PT-DW740 Скачать руководство пользователя

Страница: 112 / 133

112 - ENGLISH

Chapter 5 Maintenance — Maintenance/replacement

Maintenance/replacement

Before maintaining/replacing the unit

Make sure to turn off the power before maintaining or replacing the unit. (

pages 41, 43)

When switching off the projector, make sure to follow the procedures in “Switching off the projector” (

page 43).

Maintenance

Outer case

Wipe off dirt and dust with a soft, dry cloth.

If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector with a dry cloth.

Do not use benzene, thinner, rubbing alcohol, other solvents, or household cleaners. Doing so may deteriorate the outer case.

When using chemically treated dust cloths, follow the instructions written on its packaging.

Front surface of the lens

Wipe off dirt and dust from the front surface of the lens with a soft clean cloth.

Do not use a cloth that is fluffy, dusty, or soaked with oil/water.

Since the lens is fragile, do not use excessive force when wiping the lens.

Attention

The lens is made of glass. Impacts or excessive force when wiping may scratch its surface. Please handle with care.

Air filter unit

Perform maintenance of the air filter unit in the following cases.

The air filter is clogged with dust, causing the filter replacement message to appear on the screen and the filter indicator <FILTER> to light in

red.

Pulling out the air filter unit

Remove the air filter cover.

Use a Phillips screwdriver to turn the air filter cover screw

counterclockwise until it turns freely, and then remove the air

filter cover.

Air filter cover fixing screw

Air filter cover

Pull out the air filter unit.

Grasp the air filter unit tabs and remove the air filter unit from

the projector body.

Air filter unit

Tabs

Attention

After pulling out the air filter unit, remove any large foreign objects or dust present in the air filter unit compartment and the air intake port of

the projector body.

Cleaning the air filter unit

First pull out the air filter in the procedure described in “Pulling out the air filter unit”.

Clean the air filter unit.

i) Soak the air filter unit in cold or warm water and then lightly

rinse it.

Do not use cleaning tools such as brushes.

When rinsing, hold the frame of the air filter unit without

putting strong pressure on the filter unit.

ii) Rinse the unit two to three times using fresh water each time.

Insufficient rinsing may result in odors.

Содержание PT-DW740






































































































































Результаты поиска

Содержание PT-DW740

Отзывы:

Похожие инструкции для PT-DW740

Бренды по названию

Популярные бренды

Panasonic PT-DW740, Руководство по эксплуатации

Результаты поиска

Содержание PT-DW740

Отзывы:

Похожие инструкции для PT-DW740

Бренды по названию

Популярные бренды