Panasonic PT-DS20KE Скачать руководство пользователя

Страница: 5 / 186

Read this first!

ENGLISH - 5

Important Information

WARNING:

Do not cover the air intake/exhaust ports or place anything within 500 mm (20") of them.

Doing so will cause the projector to overheat, which can cause fire or damage to the projector.

Do not place the projector in narrow, badly ventilated places.

Do not place the projector on cloth or papers, as these materials could be drawn into the air inlet port.

Do not place your hands or other objects close to the air exhaust port.

Doing so will cause burns or damage your hands or other objects.

Heated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot

withstand heat close to this port.

Do not look at or place your skin into the light emitted from the lens while the projector is being used.

Doing so can cause burns or loss of sight.

Extremely strong light is emitted from the projector’s lens. Do not look at or place your hands directly into

this light.

Be especially careful not to let young children look into the lens. In addition, turn off the power and switch

off the main power when you are away from the projector.

Never attempt to remodel or disassemble the projector.

High voltages can cause fire or electric shocks.

For any inspection, adjustment and repair work, please contact an Authorized Service Center.

Do not project an image with the lens cover of the projection lens (optional) attached.

Doing so can cause fire.

Do not allow metal objects, flammable objects, or liquids to enter inside of the projector. Do not allow

the projector to get wet.

Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the

projector.

Do not place containers of liquid or metal objects near the projector.

If liquid enters inside of the projector, consult your dealer.

Particular attention must be paid to children.

Use the ceiling mount bracket specified by Panasonic.

Using the ceiling mount bracket other than the specified one will result in falling accidents.

Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.

Installation work (such as ceiling mount bracket) should only be carried out by a qualified technician.

If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks.

Be sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the

projector from falling down. (Install in a different location to the ceiling mount bracket.)

Содержание PT-DS20KE



























































































































































































Результаты поиска

Содержание PT-DS20KE

Отзывы:

Похожие инструкции для PT-DS20KE

Бренды по названию

Популярные бренды

Panasonic PT-DS20KE, Руководство по эксплуатации

Результаты поиска

Содержание PT-DS20KE

Отзывы:

Похожие инструкции для PT-DS20KE

Бренды по названию

Популярные бренды