Panasonic PT-DS20KE Скачать руководство пользователя

Страница: 148 / 186

Maintenance/replacement

148 - ENGLISH

Maintenance

Maintenance/replacement

Before maintaining/replacing the unit

Make sure to turn off the power before maintaining or replacing the unit. (



pages 50, 53)

When switching off the projector, make sure to follow the procedures in “Switching off the projector” (



page 53).

Maintenance

▶

■

Outer case

Wipe off dirt and dust with a soft, dry cloth.

▶

If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector

with a dry cloth.

▶

Do not use benzene, thinner, or rubbing alcohol, other solvents, or household cleaners. Doing so may

deteriorate the outer case and peel off the paint.

▶

When using chemically treated dust cloths, follow the instructions written on its packaging.

▶

■

Lens

If dirt or dust accumulates on the surface of the lens, it will be enlarged and projected onto the screen.

Wipe off dirt and dust from the front surface of the lens with a soft clean cloth.

▶

Do not use a cloth that is fluffy, dusty, or soaked with oil/water.

▶

Since the lens is fragile, do not use excessive force when wiping the lens.

Attention

The lens is made of glass. Impacts or excessive force when wiping may scratch its surface. Please handle with

care.

▶

■

Air filter unit

Perform maintenance of the air filter unit in the following cases.

▶

The air filter is clogged with dust, causing the filter replacement message to appear on the screen and the

filter indicator <FILTER> to light in red.

1) Remove the air filter cover.

▶

Use a Phillips screwdriver to turn the air filter cover screw counterclockwise until it turns freely, and then

remove the air filter cover.

Air filter cover fixing screw

Air filter cover

2) Pull out the air filter unit.

▶

Remove the air filter unit frame at the front side (with the lens) from the tab of the projector body while

slightly pressing the center and pull out in the direction of the arrow, and then remove the frame at the

opposite side from the tab.

▶

After pulling out the air filter unit, remove large foreign objects and dust from the air filter unit compartment

and the air intake port of the projector body if there are any.

Tabs on the

projector body

Tabs on the

projector body

Air filter unit compartment and

the projector’s air intake port

Air filter unit

Attention

Take care not to touch the radiator fin when removing dirt or dust.

Содержание PT-DS20KE



























































































































































































Результаты поиска

Содержание PT-DS20KE

Отзывы:

Похожие инструкции для PT-DS20KE

Бренды по названию

Популярные бренды

Panasonic PT-DS20KE, Руководство по эксплуатации

Результаты поиска

Содержание PT-DS20KE

Отзывы:

Похожие инструкции для PT-DS20KE

Бренды по названию

Популярные бренды