Panasonic PT-DS20KE Скачать руководство пользователя

Страница: 125 / 186

[SECURITY] menu

ENGLISH - 125

Settings

[DISPLAY SETTING]

Overlap the security message (text or image) over the

projecting image.

1) Press

▲▼

to select [DISPLAY

SETTING].

2) Press

◀▶

to switch [DISPLAY

SETTING].

▶

The setting will change as follows each time

you press the button.

[OFF]

[TEXT]

[USER

LOGO]

[OFF]

The text display is disabled.

[TEXT]

The text display is enabled.

[USER

LOGO]

The picture registered by the user is

projected.

Note

To create the image for [USER LOGO], “Logo

Transfer Software” included in the supplied CD-

ROM is required.

[TEXT CHANGE]

Change the text displayed when the text display is

enabled by selecting [TEXT] in [DISPLAY SETTING].

1) Press

▲▼

to select [TEXT CHANGE].

2) Press the <ENTER> button.

▶

The

[TEXT CHANGE]

screen is displayed.

3) Press

▲▼◀▶

to select the text, and

press the <ENTER> button to enter the

text.

4) Press

▲▼◀▶

to select [OK], and

press the <ENTER> button.

▶

The text is changed.

[CONTROL DEVICE SETUP]

Enable/disable the button operations on the control

panel and the remote control.

1) Press

▲▼

to select [CONTROL

DEVICE SETUP].

2) Press the <ENTER> button.

▶

The

[CONTROL DEVICE SETUP]

screen is

displayed.

3) Press

▲▼

to select an item.

▶

■

To set [CONTROL PANEL]

▶

You can set the limitation on the control from

the control panel.

4) Select [CONTROL PANEL] in Step 3).
5) Press the <ENTER> button.

▶

The

[CONTROL PANEL]

screen is displayed.

6) Press

◀▶

to switch [CONTROL

PANEL].

▶

The setting will change as follows each time

you press the button.

[ENABLE]

[DISABLE]

[USER]

[ENABLE]

Enables all button operations from

the projector body.

[DISABLE]

Disables all button operations

from the projector body.

[USER]

Operation of all buttons on the

projector body can be enabled/

disabled separately.

7) Press

▲▼

to select [APPLY], and

press the <ENTER> button.

▶

The confirmation screen is displayed.

8) Press

◀▶

to select [OK], and press

the <ENTER> button.

▶

Enabling/disabling any projector body

button

7) Select [USER] in Step 6).

▶

Setting items can be selected for the buttons on

the projector body.

Содержание PT-DS20KE



























































































































































































Результаты поиска

Содержание PT-DS20KE

Отзывы:

Похожие инструкции для PT-DS20KE

Бренды по названию

Популярные бренды

Panasonic PT-DS20KE, Руководство по эксплуатации

Результаты поиска

Содержание PT-DS20KE

Отзывы:

Похожие инструкции для PT-DS20KE

Бренды по названию

Популярные бренды