Panasonic PT-DS20KE Скачать руководство пользователя

Страница: 15 / 186

Precautions for use

ENGLISH - 15

Important Information

Precautions for use

Cautions when transporting

The projection lens (optional accessory) is susceptible to effects due to vibration or impact. Make sure to

remove the lens when transporting.

When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. Not

doing so may damage the internal parts and result in malfunctions.

Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.

Cautions when installing

■

After removing the projection lens (optional accessory), attach the dust-

proof sponge included with the projector.

If the cover is not attached, dust will accumulate inside and may cause malfunctions.

■

Do not set up the projector outdoors.

The projector is designed for indoor use only.

■

Do not set up the projector in the following locations.

▶

Places where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal

parts and result in malfunctions.

▶

Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may fluctuate due

to the hot air from the air exhaust port or the heated or cooled air from the air conditioner. Make sure that

the exhaust from the projector or other equipment, or the air from the air conditioner does not blow toward

the front of the projector.

▶

Near lights (studio lamps, etc.) where temperature changes greatly (“Operating environment” (



page 181)):

Doing so may shorten the life of the lamp or result in deformation of the outer case and malfunctions.

▶

Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.

▶

Place where there is a high-power laser equipment: It may cause malfunction in DLP chips when the laser

beam enters the lens.

■

Be sure to ask a specialized technician or your dealer when installing the

product to a ceiling.

If the product is to be installed hanging from the ceiling, purchase an optional Ceiling Mount Attachment.

Model No.: ET-PKD510H (for high ceilings), ET-PKD510S (for low ceilings)

■

Lens focus

The high clarity projection lens is thermally affected by the light from the light source, making the focus

unstable in the period just after switching on the power. Wait at least 30 minutes with the image projected

before adjusting the lens focus.

■

Make sure to set [HIGH ALTITUDE MODE] to [ON] when using the projector

at elevations of 1 400 m (4 593 ft) or higher and lower than 2 700 m (8 858 ft)

above sea level.

Failure to do so may shorten the life of the internal parts and result in malfunctions.

■

Make sure to set [HIGH ALTITUDE MODE] to [OFF] when using the projector

at elevations lower than 1 400 m (4 593 ft) above sea level.

Failure to do so may shorten the life of the internal parts and result in malfunctions.

■

Do not install the projector at elevations of 2 700 m (8 858 ft) or higher above

sea level.

Doing so may shorten the life of the internal parts and result in malfunctions.

Содержание PT-DS20KE



























































































































































































Результаты поиска

Содержание PT-DS20KE

Отзывы:

Похожие инструкции для PT-DS20KE

Бренды по названию

Популярные бренды

Panasonic PT-DS20KE, Руководство по эксплуатации

Результаты поиска

Содержание PT-DS20KE

Отзывы:

Похожие инструкции для PT-DS20KE

Бренды по названию

Популярные бренды