51
4.5.5.
Port Configuration Extend
On the Basic Switch Configuration Menu, pressing "E" opens the Port Configura
-
tion Extend Menu screen, as shown in Fig. 4-15. On this screen, you can display
port status and configure extended port settings.
PN28168 Local Management System
Basic Switch Configuration -> Port Configuration Extend Menu
Global Jumbo Status: Disabled
Port Trunk Type Link Port Name EAP Pkt FW
---- ----- ----------- ---- --------------- ------------
1 --- 1000T Down Port_1 Disabled
2 --- 1000T Down Port_2 Disabled
3 --- 1000T Down Port_3 Disabled
4 --- 1000T Down Port_4 Disabled
5 --- 1000T Down Port_5 Disabled
6 --- 1000T Down Port_6 Disabled
7 --- 1000T Down Port_7 Disabled
8 --- 1000T Down Port_8 Disabled
9 --- 1000T Down Port_9 Disabled
10 --- 1000T Down Port_10 Disabled
11 --- 1000T Down Port_11 Disabled
12 --- 1000T Down Port_12 Disabled
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set [J]umbo Status
[P]revious Page Set [E]AP Packet Forwarding
Set Port N[a]me [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-15 Port Configuration Extend Menu
Screen Description
Global Jumbo
Status
Displays the jumbo frame settings. "Disabled" is the factory default setting.
Enabled
The jumbo frame is enabled.
Disabled
The jumbo frame is disabled.
Port
Displays the port number.
Trunk
Displays the group number for a trunked port.
Type
Displays the port type.
100TX
The port type is 10/100BASE-TX.
1000T
The port type is 10/100/1000BASE-T.
1000X
The port type is SFP extension port.
Link
Displays the current link status.
Up
A link has been established successfully.
Down
A link has not been established.
Port Name
Displays the port name.
EAP Pkt FW
Displays the EAP Packet Forwarding function settings. For all ports, "Disabled" is
the factory default setting. Set this item to "Enabled" to send EAP frames used in
IEEE802.1X authentication or "Disabled" to discard them.
Enabled
The EAP Packet Forwarding function is enabled.
Disabled
The EAP Packet Forwarding function is disabled.
