153
Available commands are listed below.
N
Set the domain name.
Press "N." The command prompt changes to "Enter RRP Domain Name>." Enter the name of
the domain to be configured in 25 characters or less.
T
Set the node role.
Press "N." The command prompt changes to "Enter RRP Node Type (M/T) >." Press "M" to set
the domain for a master node. Press "T" to set the domain for a transit node.
P
Set the primary port.
Press "P." The command prompt changes to "Enter RRP Primary Port >." Enter the port num
-
ber you wish to set as a primary port.
S
Set the secondary port.
Press "S." The command prompt changes to "Enter RRP Secondary Port >." Enter the port
number you wish to set as a secondary port.
O
Set the polling interval.
Press "O." The command prompt changes to "Enter RRP Polling Interval>." Enter a value
between 1 and 2 (seconds) as the polling interval.
F
Set the timeout for polling.
Press "F." The command prompt changes to "Enter RRP Fail Period>." Enter a value between
2 and 5 (seconds) as the timeout for polling.
S
Set the control VLAN ID.
Press "S." The command prompt changes to "Enter Control VLAN ID >." Enter the VLAN ID (2
to 4094) you wish to set as a control VLAN. When entering two or more port numbers, sep
-
arate them with a comma without a space, or use a hyphen for consecutive numbers.
D
Set the data VLAN ID.
The command prompt changes to "Enter Data VLAN ID >." Enter the VLAN ID (1 to 4094)
you wish to set as a data VLAN. When entering two or more VLAN IDs, separate them with
a comma without a space, or use a hyphen for consecutive numbers.
A
Set a domain.
Press "A" to apply your settings.
Q
Return to the parent menu.
Note:
If you press "Q" (Quit) after setting a domain, your settings will not be applied.
Be sure to press "A" (Apply) to apply your domain settings.
