102
PAW-VP•LDHW - Technical Manual – 2019-11
How to make Settings
9
9.1.2 Detailed setting procedure for remote controller model RTC4
This allows the system address, indoor unit address, and other settings to be made for the
individual or group-control indoor unit to which the remote controller used for detailed settings is
connected.
When detailed settings mode is engaged, operation stops at the individual or group-control
indoor unit where the remote controller used for detailed settings is connected. Simple settings
items can also be set at this time.
Proceed as follows:
1. Press and hold the
,
and
CANCEL
button simultaneously for 4 seconds or
longer.
2. “
SETTING
”, unit No. “
1- 1
” (or “
ALL
” in the case of group control), item code “
10
”,
and settings data “
00
XX” are displayed blinking on the remote controller LCD dis-
play (see figure below). At this time, the indoor unit fan (or all indoor unit fans in the
case of group control) begins operating.
3. If group control is in effect, press the
UNIT
button and select the address (unit No.)
of the indoor unit to set. At this time, the fan only at the selected indoor unit begins
operating.
4. Press the temperature setting
/
buttons to select the item code to change.
5. Press the timer time
/
buttons to select the desired setting data.
* For item codes and setting data, refer to sec. 9.2 “Detailed settings for indoor/out-
door unit RTC5B/RTC2/4“ on page 104.
6. Press the
button. (The display stops blinking and remains lit, and setting is
completed.)
7. Press the
button to return to normal remote controller display.
Keys and displays
CZ-RTC4
A
°
°
1
–
7
:
Keys and displays for
the steps shown above.
9.1.3 Detailed setting procedure for remote controller model RTC2
Proceed as follows:
1. Press and hold the
,
and
buttons simultaneously for 4 seconds or longer.
2. Press the temperature setting
/
buttons to select the item code to change.
3. Press the timer time
/
buttons to select the desired setting data.
* For item codes and setting data, refer to sec. 9.2 “Detailed settings for indoor/out-
door unit RTC5B/RTC2/4“ on page 104.
4. Press the
button. (The display stops blinking and remains lit, and setting is
completed.)
5. Press the
button to return to normal remote controller display.
Keys and displays
4
5
1
2
3
Connection
How to make settings on outdoor unit
RC
(3P, BLU)
Outdoor
unit
PCB
PCB connector
(3P, BLU)
Remote controller Assy
Special service
checker wiring
Relay connector
(2P, WHT)
Содержание PAW-VP1000LDHW
