11
Installation
(continue)
To Connect the device to a Personal Computer for External Use
1
Attach the rubber feet to the dimples on the
base of the device.
2
Start the personal computer.
3
Plug the AC adaptor supplied with the device
into the DC IN 16 V socket on the device.
4
Pressing the power button switches on the
power and starts up the device.
After startup, the power indicator will light up
green.
5
To be connected by USB 3.0
Plug a USB 3.0 cable B connector into the
USB connector on the device, then plug the
other end (A connector) of the USB 3.0 cable
into the USB 3.0 port on the personal
computer.
Caution: Even with a USB 3.0 cable, if the
device is connected to a USB 2.0 port it will
operate as a USB 2.0 device.
<Note>
No USB 3.0 cable is supplied with the device
in the package. Use a commercially available
USB 3.0 cable (shielded).
Take care to use a USB cable that is no
longer than 3 metres. The device may not
operate properly with a cable longer than
3 metres.
To be connected by USB 2.0
Plug a USB 2.0 cable B connector into the
USB connector on the device, then plug the
other end (A connector) of the USB 2.0 cable
into the USB 2.0 port on the personal
computer.
<Note>
No USB 2.0 cable is supplied with the device
in the package. Use a commercially available
USB 2.0 cable (shielded).
Take care to use a USB cable that is no
longer than 3 metres. The device may not
operate properly with a cable longer than
3 metres.
Dimples
USB 3.0 connector
USB 3.0 connector
AJ-PCD30P_E-VQT3R23-2_E.book 11 ページ ２０１３年３月６日 水曜日 午後６時１分
