19
Overview of dedicated software
(continue)
P2 Drive internal setting (Windows)
When used internally, a setting can be made to
prevent USB disconnection. When the USB
connector is inside your PC, the USB cable
cannot easily be inserted and removed. We
recommend performing this setting to prevent
erroneous disconnection of the USB.
P2 Drive internal setting
When the device is used internally in the 5-type
bay of your PC, the following settings are
performed after connecting the device to your
PC.
1
From the “Start” menu, select “All programs”
J
“Panasonic P2”
J
“P2Drive Settings” and
then select “Enable Internal Drive”.
2
A panel of the type shown in the figure will be
displayed. Click “OK” on the panel.
This setting is only available in Windows.
Canceling P2 drive internal setting
To reconnect the device externally to a computer
that has been set to use the device internally,
perform the following.
1
Connect the device to your PC externally.
2
From the “Start” menu, select “All programs”
J
“Panasonic P2”
J
“P2Drive Settings” and
then select “Disable Internal Drive”.
3
A panel of the type shown in the figure will be
displayed. Click “OK” on the panel.
AJ-PCD30P_E-VQT3R23-2_E.book 19 ページ ２０１３年３月６日 水曜日 午後６時１分
